DBS series
Rated Input: DC45 – 160V, DC66 – 160V, DC200 – 400V
Rated Output Wattage: 100 – 700W
* When remote ON/OFF is not used, short RC1 and -VIN.
* When the output voltage adjustment is not used, open the TRM pin respectively.
* When remote sensing is not used, make sure +VOUT and +S are shorted, and that -VOUT and -S are shorted as well.
Features
- Ideal for distributed power systems
- Thin and small size
- Built-in overcurrent, overvoltage and thermal protection circuits
- Built-in remote ON/OFF (On both side of input and output)
- Inverter operating monitoring (IOG)
- Mounting hole (M3 tapped)
- N+1 redundant operation
- The beet noise is decreased by installing of the crystal oscillator (DBS700)
Line-up
Output Wattage | Model | Dimensions | Cooling Method |
---|---|---|---|
100W | DBS100A | 61×12.7×116.8mm [2.4×0.5×4.6 inches] | Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) |
150W | DBS150A | 61×12.7×116.8mm [2.4×0.5×4.6 inches] | Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) |
200W | DBS200B | 61×12.7×116.8mm [2.4×0.5×4.6 inches] | Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) |
400W | DBS400B | 61×12.7×116.8mm [2.4×0.5×4.6 inches] | Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) |
700W | DBS700B | 61×12.7×116.8mm [2.4×0.5×4.6 inches] | Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) |