Miki Pulley S Models
Specifications
| Model | E1 | E2 | JK1 | JK2 | Y1 | Y2 | |
|---|---|---|---|---|---|---|---|
| Output shaft rotation direction* | Counterclockwise | Clockwise | Counterclockwise | Clockwise | Counterclockwise | Clockwise | |
| Rated output shaft torque | [N･m] | 1.38 | 1.38 | 2.88 | 2.88 | 6.90 | 6.90 |
| Output shaft rotation speed | [min-1] | 0～300 (1430[min-1]at input) |
0～300 (1430[min-1]at input) |
0～300 (1430[min-1]at input) |
0～300 (1430[min-1]at input) |
0～315 (1430[min-1]at input) |
0～315 (1430[min-1]at input) |
| 0～360 (1720[min-1]at input) |
0～360 (1720[min-1]at input) |
0～360 (1720[min-1]at input) |
0～360 (1720[min-1]at input) |
0～380 (1720[min-1]at input) |
0～380 (1720[min-1]at input) |
||
| Mass | [kg] | 1.4 | 1.4 | 1.9 | 1.9 | 4.8 | 4.8 |
*The rated output shaft torque value is constant across the entire speed change range.
*A rated output shaft torque 11.5 N･m (QX model) is also available. Please consult with us.
*The output shaft rotation speed values are based on the rated load.
*The * mark indicates the rotation direction viewed from the output shaft end.
Dimensinos E1/E2
Dimensinos JK1/JK2
Dimensinos Y1/Y2
