NICHIFU Non-Insulated Terminals and Sleeves
MATERIAL
Oxygen free copper strip/tube. (electro-tin-plating)
RATED CURRENT
Please see amperage rating table for insulated wires.
STANDARDS
Japanese Industrial Standards, JIS C2805 and JIS C2806.
UL 486A (File No. E44245)
CSA C22.2 (File No. LR-28418)
FOR SAFETY USE
Please observe the following points to prevent over-heat and possible fire.
Copper wire only.
Use our recommended tools.
Use with specified wire range.
(NOTE)
| APPLICABLE WIRE |
|
|---|---|
| UL/CSA | To have UL/CSA listed or certified, use proper Nichifu crimp tool. |
| WIRE STRIP LENGTH | A strip length should be approx. 2mm longer than barrel length. (conductor should come out 1mm for both ends) |
STRUCTURE OF OUR PART NUMBER
RING TERMINALS (R TYPE)
SQUARE RING TERMINALS (2 HOLES)
RING TERMINALS (RD TYPE)
SQUARE RING TERMINALS (CB TYPE)
RING TERMINALS (90 DEGREES BEND TERMINALS)
SPADE TERMINALS (Y TYPE)
SLEEVES (B TYPE)
SLEEVES (P TYPE)
OPEN END CONNECTORS (E TYPE)
PIN TERMINALS (TC TYPE)
BLADE TERMINALS (BT TYPE)
FLAG RING TERMINALS (FT TYPE)
INSULATION CAP
HIGH TEMPERATURE TERMINALS&SLEEVES (N TYPE)
