Flow Coater FL-G Series

Beautiful paint surface with uniformly smooth finish
Applications

Flat Surface Coating

Features

• Economical, resource-efficient coating equipment without wasteful use of paint
• Beautiful paint surface with uniformly smooth finish
• High-speed coating at conveyor speeds of 40 to 120 m/min
• Hygienic working environment with no paint mist
• The double-head type flow coater can use two-component paint as well.
• Easy to handle; no special coating skill required.

Principle of the Flow Coater

• A stream of paint runs down in the form of a thin curtain (or film) of a fixed width, and the workpiece is painted as a conveyor carries it under the stream.
• Since all of the paint that fails to adhere to the workpiece is collected and circulated by a pump, no paint goes to waste.

Usable Types of Liquid

●Paint●Adhesive●Stripping Agent●Photosensitizing Agent●Print Processing Fluid/Dye●Others

Applications

●Sliding Door Material●Furniture●Buddhist Altar●Shelf Board●Ping-Pong Table●Flooring●Decorative Panel●Exterior Wall Material●Building Material●Steel Sheet●Mirror●Leather●Ski Board●Measure●Automotive Rear View Mirror●Printed Board●Gasket●Tire Air Tube●Water-Proof Sheet●Anti-Vibration Rubber

Pump

• Packing-less centrifugal pump with no sliding part
• The pump motor is of the safety-enhanced explosion-proof type.
• The pump motor is controlled by an inverter.
• The flow rate is displayed in digital form, allowing numerical control and high repeatability.
• The paint filter chamber is located outside, making it easy to clean and replace the filter.
• The filter bypass makes it easy to inspect, maintain, and replace paint (except FL-3SG/W3G).
• The paint container can be detached and attached easily, and it is also easy to change paint.
• The paint container has a structure that allows smooth paint circulation.

Head

• The head can be opened and closed easily, and it is also easy to clean the inside of the head.
• FL-S3G/W3G is of the hinge type, and FL-S6G/W6G and FL-S12G/W12G are of the horizontal slide type.
• FL-S6G/W6G and FL-S12G/W12G uses an air cylinder to drive opening and closing motions, which allows the head to be opened and closed with a one-touch operation.
• The head space is properly set by a constant-pressure device and a stopper mechanism, which always provides a stable level of repeatability regardless of the operator.
• The slit can be fine-tuned anywhere across the entire width of the paint curtain.
• The paint capacity of the head is small, ensuring the amount of remaining paint is small.

Conveyor

• The conveyor speed is the key point in determining the paint film thickness.
• The conveyor speed can be adjusted in a fine-grained manner through inverter control, and direct speed readings are available.
• The conveyor uses an urethane resin belt, and dirt can be wiped off easily with thinner.
• The meandering motion of the belt can be adjusted with the take-up method of the crown mechanism.

Specs