Special Spray Gun for Photocatalyst and Hydrophilic Solution
The LPH Series offers improved atomizing and functional performance.
- LPH-50-S5/-S9
- LPH-101-S18
- LPH-101-S19/-S23/-S27/-S34
- LPH-400-S1
Features
- Provides a flat application pattern with an even layer of particles.
- Provides a wide pattern even at a low flow rate.
- Delivers higher atomization performance by lowering the inlet pressure of the spray gun.
- Offers higher coating efficiency in short distant spraying (150 mm or so).
Applications
Special spray gun for photocatalyst solution
Creating super hydrophilic film for anti-fogging, antifouling protection, antibacterial protection, water cleaning, gas decomposition, etc.
Specs
| Model | Applications | Features | Nozzle orifice bore[φmm] | Atomizing air pressure [Mpa] | Performance | ||||
|---|---|---|---|---|---|---|---|---|---|
| High atomization | General-purpose atomization | Spray distance[mm] | Pattern width [mm] | Fluid output[mℓ /min] | |||||
| LPH-50-S5 | For interior coating | ○ | With one-touch adjusting knob | 0.4 | 0.2 | 400 | 150 | 20 | |
| (Fluid output: 0 to 20mℓ ・min) | |||||||||
| LPH-50-S9-04 | ○ | 0.4 | 0 to 15 | ||||||
| LPH-50-S9-06 | ○ | 0.6 | 0 to 22 | ||||||
| LPH-50-S9-10 | ○ | 1.0 | 0 to 35 | ||||||
| LPH-101-124LVG | For exterior or industrial coating | — | ○ | 1.2 | 200 | 150 | 40 | ||
| LPH-101-S18 | ○ | 1.0 | 150 | 200 | 40 | ||||
| LPH-101-S19 | ○ | LPH-101-S18 with one-touch adjusting knob | 1.0 | 150 | 200 | 40 | |||
| (Fluid output: 0 to 80mℓ ・min) | |||||||||
| LPH-101-S23 | For specific coating material manufacturer | ◎High atomization | With one-touch adjusting knob | 0.5 | 150 | 200 | 40 | ||
| LPH-101-S27 | ○ | 0.8 | 150 | 200 | 40 | ||||
| LPH-400-S1 | ○ | Short-distance large spray pattern | 1.2 | 0.15 | 150 | 300 | 45 | ||
| LPH-101-S34 | ○ | Jam nut locking type with one-touch adjusting knob | 1.0 | 0.2 | Fine flow control can be exerted.(comparison with LPH-101-S19)(Fluid output: 0 to 50mℓ /min) | ||||
* The fluid cups are sold separately.
* As a gravity fluid cup, one made of stainless steel is recommended.
* General paint cannot be used for LPH-101-S18, LPH-101-S19, LPH-101-S23, LPH-101-27 or LPH-101-34.
* Before using these spray guns, make sure you understand the properties of the photocatalyst and hydrophilic solution.
– Basics for photocatalyst solution coating –
- The coating method is different from the general spray coating technique.
- Do not coat in a transparent atomization state. Do not leave an uncoated area.
- An oil-free compressor is used.
・The thickness of coating film is from 0.1 to 1 μm (exterior coating).
・Coating skill is required (use the manufacturer’s training).
・The chemical reaction with airborne oil mists may lead to improper coating.
