ENC-AR1120L-SUS
Implementation specifications board cooler stainless steel, high durability
| Cooling capacity (w) | 950/1100 |
|---|---|
| Voltage Rating (v) | Single-phase AC200 |
| Mount type | Side-mount |
| External dimensions | H730×W300×D230 |
| Volume (Kg) | 24 |
| Mount Type | Side-mount |
|---|---|
| Cooling Capacity (W) | 950/1100 |
| Setting Temperature Range (°C) | 25~45 |
| Use Area Temperature (°C) | 20~50 |
| Use Area Humidity (%RH) | 10-85（No condensation） |
| External Dimensions (mm) | H730×W300×D230 |
| Volume (kg) | 24 |
| Surface Finish | 180-HL No.4 NSSC finish |
| Voltage Rating (V) | Single-phase AC200 |
| Consumption Current/Rating (A) | 2.6/2.4 |
| Consumption Current/MAX (A) | 3.1/3.2 |
| Starting Current (A) | 7.5/7.1 |
| Consumption Voltage/Rating (W) | 440/460 |
| Consumption Voltage/MAX(W) | 560/570 |
| Noise Resistance | Fast Transient / LEVEL4 by burst immunity test |
| Vibration Resistance | 5Hz frequency 20mm total amplitude |
| Dust & Water Protection Grade | Equivalent to IP54 (internal circulation route) |
| Coolant | R-134a 230g |
| Noise (dB) | 64/68 |
| External Output | Cooling operation output, alarm output (a non-voltage contact: Resistive load 250V 2A) |
| Display | LED RUN LED display / temperature error in the panel |
| Regulatory Compliance | Electrical Appliance and Material Safety Law |
| Environmental Response | RoHS |
Note:
Cooling capacity: 35°C ambient temperature, the value of the rated capacity when the set temperature 35°C inside the panel. (Method: JIS-C-9612 air enthalpy measurement conditions)
Ambient humidity / ambient temperature is not meant to satisfy all conditions in temperature and humidity.
Rated value: 35°C ambient temperature, ambient humidity RH 40% value at the time of use.
RH 40% when the value of the maximum allowed ambient temperature, ambient humidity using an ambient temperature of use: The value MAX.
Please read instructions carefully before use, please use properly
Dimension
ENC-AR1120L-SUS
3m length outside the machine code: the power supply line (1)
3m length outside the machine code: the alarm output line (2)
Cut Mounting
ENC-AR1120L-SUS
Diagram is viewed from outside the control panel ※ (left) standard panel cut.
When processing, please keep the thread pitch.
There are (with some exceptions), the panel cut dimensions can be changed without prior notice minimum standard panel cut, but will not change even after the model change.
Take out the power supply line will be part of φ50 processing or shaded area.
Panel cut half buried (center)
minimum cut panel (right)
ability characteristic graph
