ABRASION RESISTANT
TAC HERAN
Features
- With abrasion resistant rubber, about three times as strong as “TAC SD-A” in abrasion resistance.
- With abrasion resistant rubber, excellent in anti-static effect.
Application
- For suction/delivery using vacuum conveyors and shooters in industrial factories, vessels, shipyards,construction sites and for the maintenance of environmental protection.
- For suction/delivery of slurry, cement, crushed rock,iron ore, etc.
- For suction/delivery of cereals like, paddy, rice,wheat, etc.
| Fluid | Water・hot water、Powder・granule |
|---|---|
| Material | rubber |
| Temperature | -20 ～ 50 |
| Function |
|
STANDARD DIMENSION AND PROPERTIES
TAC HERAN-N
Features
- Model resistant to hot wind of 100 °C (designed for resistance to hot wind of a maximum of 120 °C in straight installation)
- Model safety improved by grounding effect with steel wires as well as conductive rubber.
- Less ozone degradation compared to TAC HERAN.
- Excellent weather resistance
Application
- For transportation using vacuum conveyors, shooters,etc in industrial factories, shipping, shipyards and construction sites.
- For transportation of slurry, sintered cement, gravel,iron ore, etc
- For transportation of cereals such as paddy rice, rice,wheat, etc during harvesting.
| Fluid | Water・hot water、Powder・granule |
|---|---|
| Material | rubber |
| Temperature | －20～50･80 (suction)･100 (hot wind）･120 (hot wind in straight installation） |
| Function |
|
STANDARD DIMENSION AND PROPERTIES
TAC HERAN-CL
Features
- Abrasion resistance four times as much as TAC HERAN-N
- Comparison made in respect of a worn volume during 8 hours from the start of test.
- Transparent wall enables visual check of the material flow.
- Embedded grounding wire gives an excellent antistatic effect.
- With very smooth inner wall, you can get increased flow capacity.
Application
- For transportation of slaked lime and activated carbon at garbage incineration plant.
- For transportation of powder, granule, grain or other fine particles where static electricity is apt to generated.
- For suction and discharge of sintering cement, gravels and iron ore, etc.
| Fluid | Water・hot water、Powder・granule |
|---|---|
| Material | other (polyurethane resin |
| Temperature | -10 ～ 50 |
| Function |
|
STANDARD DIMENSION AND PROPERTIES
TAC HERAN ACE
Features
- Abrasion resistance four times as much as TAC HERAN-N.
- Translucent wall enables visual check of the material flow and easy detection of a clogged portion.
- Light weight and flexible.
- Pressure-resistant performance against maximum allowable pressure of 0.5MPa1(5.1kgf/cm2).
- With reinforcing fiber, this hose is quite durable and most suitable for using at the uneven place where the hose is subject to elongation load.
- Embedded grounding wire gives an excellent anti-static effect.
Application
- For transportation of slaked lime and activated carbon at garbage incineration plant.(Specially, recommendable for using at a place where small bending radius is required.)
- For suction of earth and sand in the “shield” construction method.
- For suction and conveyance of crushed stone and ore.
- Hose of damper exclusive use.
| Fluid | Water・hot water、Powder・granule |
|---|---|
| Material | other (polyurethane resin |
| Temperature | -10 ～ 50 |
| Function |
|
STANDARD DIMENSION AND PROPERTIES
