INSTRUCTIONS
DRILL SIZE, CUTTING SPEED AND MATERIAL
When selecting a suitable model of drill for your application, it should be chosen on the basis of drill bit size and suitable cutting speed for
the material to be drilled. The table below shows the recommended drill bit sizes for different speeds when drilling some common materials.
The figures in the table are based on drill speeds at normal pressure and the minimum torque in conjunction with drill breakthrough. The table
only shows which drill bit sizes give the cutting speeds within the ranges stated. Note that it is quite possible to drill with smaller diameter drill
bits, i.e. at lower cutting speeds.
In order to obtain a sufficient cutting force when applying feed pressure by hand, pre-drilling is recommended for drill bit sizes above 8 mm
when drilling in mild steel, soft cast iron, malleable iron as well as for holes larger than 6 mm in forged steel and stainless steel.
Fuji Drills are light weight with a sturdy construction. Their practical design represents Fuji’s latest developments in drills technology. Fuji offers
a complete line of drills with a drilling capacity range from 2 mm to 100 mm.
Suggested Cutting Speed (min-1) for Drilling
| Material | Stainless Steel | Forged Steel | Mild Steel | Soft Cast Iron | Malleable Iron | Brass or Bronze | Aluminum | Magnesium | Plastic | Wood | Titanium |
|---|---|---|---|---|---|---|---|---|---|---|---|
| drill bit size | 9-12(m/min) | 12-15(m/min) | 24-33(m/min) | 30-45(m/min) | 24-27(m/min) | 60-90(m/min) | 60-90(m/min) | 75-120(m/min) | 30-45(m/min) | 90-120(m/min) | 15-18(m/min) |
| 3 mm | 1100 | 1400 | 3000 | 4000 | 2700 | 8000 | 8000 | 10400 | 4000 | 11000 | 1750 |
| 4 mm | 840 | 1100 | 2200 | 3000 | 2000 | 6000 | 6000 | 7800 | 3000 | 8400 | 1300 |
| 5 mm | 660 | 860 | 1800 | 2400 | 1600 | 4800 | 4800 | 6200 | 2400 | 6700 | 1050 |
| 6 mm | 550 | 700 | 1500 | 2000 | 1350 | 4000 | 4000 | 5200 | 2000 | 5600 | 880 |
| 8 mm | 420 | 540 | 1100 | 1500 | 1000 | 3000 | 3000 | 3900 | 1500 | 4200 | 660 |
| 10 mm | 330 | 430 | 900 | 1200 | 800 | 2400 | 2400 | 3100 | 1200 | 3300 | 630 |
| 12 mm | 280 | 350 | 750 | 1000 | 700 | 2000 | 2000 | 2600 | 1000 | 2800 | 440 |
| 13 mm | 260 | 330 | 700 | 920 | 630 | 1800 | 1800 | 2400 | 920 | 2550 | 400 |
| 14 mm | 240 | 300 | 640 | 850 | 580 | 1700 | 1700 | 2200 | 850 | 2400 | 370 |
| 16 mm | 210 | 270 | 560 | 750 | 500 | 1500 | 1500 | 1950 | 750 | 2100 | 330 |
| 19 mm | 180 | 230 | 480 | 630 | 430 | 1250 | 1250 | 1600 | 630 | 1800 | 280 |
| 22 mm | 150 | 200 | 410 | 540 | 370 | 1100 | 1100 | 1400 | 540 | 1500 | 240 |
| 23 mm | 140 | 190 | 390 | 520 | 350 | 1000 | 1000 | 1350 | 520 | 1450 | 230 |
| 25 mm | 130 | 170 | 360 | 480 | 320 | 960 | 960 | 1250 | 480 | 1330 | 210 |
| 28 mm | 120 | 150 | 320 | 420 | 290 | 850 | 850 | 1100 | 420 | 1200 | 190 |
| 32 mm | 100 | 130 | 280 | 380 | 250 | 750 | 750 | 980 | 380 | 1050 | 160 |
| 44 mm | 75 | 100 | 210 | 270 | 180 | 550 | 550 | 700 | 270 | 750 | 120 |
| 50 mm | 65 | 85 | 180 | 240 | 160 | 480 | 480 | 620 | 240 | 670 | 110 |
| 75 mm | 44 | 57 | 120 | 160 | 110 | 320 | 320 | 420 | 160 | 450 | 70 |
| 100 mm | 33 | 43 | 90 | 120 | 80 | 240 | 240 | 310 | 120 | 330 | 55 |
Drills Features
STRAIGHT TYPE
Global specifications
| Model | Drilling Capacity | Stall Torque | Free Speed | Type and Size of Spindle | Chuck Capacity | Side to Center | Power | Overall Length | Weight | Max. Air Consumption | Air Hose Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Type | Taper Type | mm | in | N.m | ft.lb | min-1 | Thread | Taper | mm | mm | in | W | hp | mm | in | kg | lb | m3/min | ft3/min | mm | in |
| FRD-5S-1 | 5 | 3/16 | 2 | 1.5 | 3200 | 3/8-24UNF | 6.5 | 18.5 | 3/4 | 180 | 0.24 | 188 | 7.4 | 0.6 | 1.32 | 0.60 | 21.2 | 6.3 | 1/4 | ||
| FRD-5S-2T | 5 | 3/16 | 0.3 | 0.2 | 24000 | Jacobs Taper D | 5 | 18.5 | 3/4 | 180 | 0.24 | 174 | 6.85 | 0.5 | 1.1 | 0.60 | 21.2 | 6.3 | 1/4 | ||
| FRD-6S-1T | 3 | 1/8 | 0.6 | 0.44 | 21000 | Jacobs Taper 1 | 6.5 | 21 | 17/20 | 290 | 0.39 | 177 | 6.97 | 0.7 | 1.52 | 0.54 | 19.2 | 9.5 | 3/8 | ||
| FRD-6S-2 | 5 | 3/16 | 2.5 | 1.8 | 4300 | 3/8-24UNF | 6.5 | 21 | 17/20 | 290 | 0.39 | 209 | 8.23 | 0.9 | 1.98 | 0.68 | 24 | 9.5 | 3/8 | ||
| FRD-6S-3 | 8 | 5/16 | 2.9 | 2.1 | 2800 | 3/8-24UNF | 8 | 21 | 17/20 | 290 | 0.39 | 218 | 8.56 | 1 | 2.21 | 0.68 | 24 | 9.5 | 3/8 | ||
| FRD-6S-5 | 10 | 7/16 | 7 | 5.2 | 1300 | 3/8-24UNF | 10 | 23 | 29/32 | 290 | 0.39 | 237 | 9.31 | 1.1 | 2.43 | 0.68 | 24 | 9.5 | 3/8 | ||
| FRD-6S-7 | 13 | 1/2 | 16 | 11.8 | 600 | 1/2-20UNF | 13 | 21 | 17/20 | 290 | 0.39 | 271 | 10.7 | 1.7 | 3.75 | 0.68 | 24 | 9.5 | 3/8 | ||
* Marked are furnished with Dead Handle
Tool selection guide
Standard models
| Model | Throttle | |
|---|---|---|
| Lever | Locking Lever (F) | |
| FRD-5S-1 E | 541 205 3306 | 541 207 2178 |
| FRD-5S-2T | 541 205 3310 | |
| FRD-6S-1T | 541 207 2214 | |
| FRD-6S-2 E | 541 205 3331 | 541 205 3332 |
| FRD-6S-3 E | 541 205 3337 | 541 205 3340 |
| FRD-6S-5 E | 541 205 3343 | 541 205 3346 |
| FRD-6S-7 E | 541 205 3348 | 541 205 3350 |
CE certified models
| Model | Throttle |
|---|---|
| Locking Lever (F) | |
| FRD-5S-1F EC | 541 207 2179 |
| FRD-6S-2F EC | 541 207 2216 |
| FRD-6S-3F EC | 541 207 2221 |
| FRD-6S-5F EC | 541 207 2225 |
| FRD-6S-7F EC | 541 207 2229 |
For CE region availability of non CE models,
please inquire to your Fuji representative.
NPT models
| Model | Throttle |
|---|---|
| Lever | |
| FRD-5S-2T N | 541 205 3311 |
| FRD-6S-3 N | 541 205 3335 |
PISTOL/REAR EXHAUST TYPE
Global specifications
| Model | Drilling Capacity | Stall Torque | Free Speed | Type and Size of Spindle | Chuck Capacity | Side to Center | Power | Overall Length | Weight | Max. Air Consumption | Air Hose Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Type | Taper Type | mm | in | N.m | ft.lb | min-1 | Thread | Taper | mm | mm | in | W | hp | mm | in | kg | lb | m3/min | ft3/min | mm | in |
| FRD-5P-1 | 5 | 3/16 | 2 | 1.5 | 3200 | 3/8-24UNF | 6.5 | 18 | 18/25 | 180 | 0.24 | 155 | 6.1 | 0.6 | 1.32 | 0.40 | 14.1 | 6.3 | 1/4 | ||
| FRD-6PX-1T | 3 | 1/8 | 0.6 | 0.44 | 21000 | Jacobs Taper 1 | 6.5 | 21 | 17/20 | 290 | 0.39 | 182 | 7.17 | 1 | 2.21 | 0.68 | 24 | 9.5 | 3/8 | ||
| FRD-6PH-2 TH | FRD-6PH-2 | 5 | 3/16 | 2.7 | 2 | 4300 | 3/8-24UNF | Jacobs Taper 1 | 6.5 | 21 | 0.85 | 340 | 0.46 | 198 | 7.8 | 0.9 | 1.98 | 0.58 | 20.6 | 9.5 | 3/8 |
| FRD-6PH-3 TH | FRD-6PH-3 | 6.5 | 1/4 | 4.3 | 3.2 | 2800 | 3/8-24UNF | Jacobs Taper 1 | 6.5 | 21 | 0.85 | 340 | 0.46 | 198 | 7.8 | 0.89 | 1.96 | 0.58 | 20.6 | 9.5 | 3/8 |
| FRD-6PH-3 8 TH | FRD-6PH-3 8 | 8 | 5/16 | 4.3 | 3.2 | 2800 | 3/8-24UNF | Jacobs Taper 1 | 8 | 21 | 0.85 | 340 | 0.46 | 198 | 7.8 | 0.89 | 1.96 | 0.58 | 20.6 | 9.5 | 3/8 |
| FRD-6PH-5 TH | FRD-6PH-5 | 10 | 7/16 | 7.5 | 5.5 | 1300 | 3/8-24UNF | Jacobs Taper 2S | 10 | 21 | 0.85 | 320 | 0.43 | 243 | 9.54 | 1.4 | 3.09 | 0.58 | 20.6 | 9.5 | 3/8 |
| FRD-6PH-7 TH | FRD-6PH-7 | 13 | 1/2 | 15.8 | 11.7 | 600 | 1/2-20 UNF | Jacobs Taper 6 | 13 | 22.5 | 0.9 | 320 | 0.43 | 258 | 10.1 | 1.5 | 3.31 | 0.58 | 20.6 | 9.5 | 3/8 |
| FRD-8PX-1 | 8 | 5/16 | 5.9 | 4.4 | 2600 | 3/8-24UNF | 8 | 25 | 1 | 440 | 0.59 | 198.5 | 7.81 | 1.7 | 3.75 | 0.76 | 26.8 | 9.5 | 3/8 | ||
| FRD-8PX-2 | 10 | 7/16 | 12 | 8.9 | 1300 | 3/8-24UNF | 10 | 26.5 | 1 1/10 | 440 | 0.59 | 220 | 8.64 | 2.1 | 4.63 | 0.76 | 26.8 | 9.5 | 3/8 | ||
| FRD-8PX-3 | 13 | 1/2 | 20 | 14.8 | 900 | 1/2-20UNF | 13 | 25.5 | 1 | 400 | 0.54 | 253.5 | 9.95 | 2.9 | 6.39 | 0.76 | 26.8 | 9.5 | 3/8 | ||
* Marked are furnished with Dead Handle
Tool selection guide
Standard models
| Model | Jacobs Taper Models | Threaded Models (TH) | |
|---|---|---|---|
| with chuck | without chuck (W/O C) | ||
| FRD-5P-1 | 541 205 3302 | ||
| FRD-6PX-1T | 541 207 2192 | ||
| FRD-6PH-2 | 541 207 7834 | 541 210 4338 | 541 210 4359 |
| FRD-6PH-3 | 541 207 2186 | 541 210 4341 | 541 210 4362 |
| FRD-6PH-3 8 | 541 207 2187 | 541 210 4344 | |
| FRD-6PH-5 | 541 207 2188 | 541 210 4347 | 541 210 4365 |
| FRD-6PH-7 | 541 207 2190 | 541 210 4350 | 541 210 4368 |
| FRD-8PX-1 | 541 205 3363 | ||
| FRD-8PX-2 | 541 205 3366 | ||
| FRD-8PX-3 | 541 205 3368 | ||
CE certified models
| Model | Jacobs Taper Models | Threaded Models (TH) | |
|---|---|---|---|
| with chuck | without chuck (W/O C) | ||
| FRD-5P-1 | 541 207 2176 | ||
| FRD-6PH-2 | 541 210 3166 | 541 210 4339 | 541 210 4360 |
| FRD-6PH-3 8 | 541 210 4345 | ||
| FRD-6PH-3 | 541 210 3169 | 541 210 4342 | 541 210 4363 |
| FRD-6PH-5 | 541 210 3147 | 541 210 4348 | 541 210 4366 |
| FRD-6PH-7 | 541 210 3170 | 541 210 4351 | 541 210 4369 |
| FRD-8PX-1 | 541 207 2236 | ||
| FRD-8PX-2 | 541 207 2238 | 541 207 2239 | |
| FRD-8PX-3 | 541 207 2241 | 541 207 2242 | |
For CE region availability of non CE models.
Please inquire to your Fuji representative.
NPT models
| Model | Jacobs Taper Models | Threaded Models (TH) | |
|---|---|---|---|
| with chuck | without chuck (W/O C) | ||
| FRD-5P-1 | 541 205 3301 | ||
| FRD-6PH-2 | 541 210 2865 | 541 210 4340 | 541 210 4361 |
| FRD-6PH-3 8 | 541 210 3221 | 541 210 4346 | |
| FRD-6PH-3 | 541 207 8455 | 541 210 4343 | 541 210 4364 |
| FRD-6PH-5 | 541 207 8454 | 541 210 4349 | 541 210 4367 |
| FRD-6PH-7 | 541 207 8453 | 541 210 4352 | 541 210 4370 |
| FRD-8PX-1 | 541 205 3361 | ||
| FRD-8PX-2 | 541 205 3364 | ||
| FRD-8PX-3 | 541 205 3367 |
For possibility of NPT inlet for other models,
please inquire to your Fuji representative.
GRIP HANDLE MEDIUM SIZE DRILLS
Global specifications
| Model | Drilling Capacity | Stall Torque | Free Speed | Type and Size of Spindle | Chuck Capacity | Side to Center | Power | Overall Length | Weight | Max. Air Consumption | Air Hose Size | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | in | N.m | ft.lb | min-1 | Thread | Taper | mm | mm | in | W | hp | mm | in | kg | lb | m3/min | ft3/min | mm | in | ||
| FRD-12Z-1 | 12 | 1/2 | 22 | 16.2 | 1200 | 1/2-20UNF | – | 13 | 34 | 1 | 11/32 | 660 | 0.88 | 372 | 14.6 | 3.3 | 7.28 | 1.20 | 42.4 | 12.7 | 1/2 |
| FRD-16Z-1 | 16 | 5/8 | 34.3 | 25.3 | 800 | 5/8-16UNF | – | 16 | 34 | 1 | 11/32 | 660 | 0.88 | 364 | 14.3 | 3.7 | 8.16 | 1.20 | 42.4 | 12.7 | 1/2 |
Tool selection guide
Standard models
| Model | Trigger | |
|---|---|---|
| Outside trigger | Inside trigger (C) | |
| FRD-12Z-1 E | 541 205 3255 | |
| FRD-12Z-1C E | 541 205 3257 | |
| FRD-16Z-1 E | 541 205 3261 | |
| FRD-16Z-1C E | 541 205 3264 | |
CE certified models
| Model | Trigger |
|---|---|
| Inside trigger (C) | |
| FRD-12Z-1C EC | 541 207 2133 |
| FRD-16Z-1C EC | 541 207 2139 |
For CE region availability of non CE models, please
inquire to your Fuji representative.
NPT models
| Model | Trigger | |
|---|---|---|
| Outside trigger | Inside trigger (C) | |
| FRD-12Z-1 N | 541 205 3253 | |
| FRD-16Z-1 N | 541 205 3259 | |
| FRD-16Z-1C N | 541 205 3262 | |
For possibility of NPT inlet for other models,
please inquire to your Fuji representative.
HEAVY-DUTY DRILLS
Global specifications
| Model | Drilling Capacity | Reaming Tapping | Stall Torque | Free Speed | Socket | Feed Length | Power | Overall Length | Weight | Max. Air Consumption | Air Hose Size | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | in | mm | in | N.m | ft.lb | min-1 | M.T.# | mm | in | W | hp | mm | in | kg | lb | m3/min | ft3/min | mm | in | |
| FRD-20R-21 | 19 | 3/4 | 16 | 5/8 | 63.7 | 47 | 600 | 2 | 67 | 2.64 | 880 | 1.18 | 282 | 11.1 | 7 | 15.4 | 1.20 | 42.4 | 12.7 | 1/2 |
| FRD-20R-22 | 19 | 3/4 | 16 | 5/8 | 63.7 | 47 | 600 | 3 | 67 | 2.64 | 880 | 1.18 | 307 | 12.1 | 7 | 15.4 | 1.20 | 42.4 | 12.7 | 1/2 |
| FRD-23R-21 | 22 | 7/8 | 19 | 3/4 | 78.4 | 57.8 | 480 | 2 | 67 | 2.64 | 880 | 1.18 | 282 | 11.1 | 7.3 | 16.1 | 1.20 | 42.4 | 12.7 | 1/2 |
| FRD-23R-22 | 22 | 7/8 | 19 | 3/4 | 78.4 | 57.8 | 480 | 3 | 67 | 2.64 | 880 | 1.18 | 307 | 12.1 | 7.4 | 16.3 | 1.20 | 42.4 | 12.7 | 1/2 |
| FRD-25R-11 | 25 | 1 | 22 | 7/8 | 147 | 108 | 530 | 3 | 96 | 3.78 | 2100 | 2.81 | 353 | 13.9 | 14 | 30.8 | 3.20 | 113 | 19 | 3/4 |
| FRD-28R-11 | 28 | 1 1/8 | 25 | 1 | 177 | 130 | 430 | 3 | 96 | 3.78 | 2100 | 2.81 | 353 | 13.9 | 14 | 30.8 | 3.20 | 113 | 19 | 3/4 |
| FRD-32R-11 | 32 | 1 1/4 | 25 | 1 | 196 | 145 | 380 | 3 | 96 | 3.78 | 2100 | 2.81 | 353 | 13.9 | 14.5 | 31.9 | 3.20 | 113 | 19 | 3/4 |
| FRD-32R-12 | 32 | 1 1/4 | 25 | 1 | 196 | 145 | 380 | 4 | 96 | 3.78 | 2100 | 2.81 | 353 | 13.9 | 14.5 | 31.9 | 3.20 | 113 | 19 | 3/4 |
| FRD-40R-11 | 44 | 1 3/4 | 32 | 1 1/4 | 304 | 224 | 220 | 4 | 93 | 3.66 | 1800 | 2.41 | 446 | 17.6 | 18.7 | 41.1 | 3.20 | 113 | 19 | 3/4 |
| FRD-50R-11 | 50 | 2 | 50 | 2 | 431 | 318 | 150 | 4 | 93 | 3.66 | 1800 | 2.41 | 446 | 17.6 | 18.7 | 41.1 | 3.20 | 113 | 19 | 3/4 |
| FRD-65R-1 | 65 | 2 9/16 | 65 | 2 9/16 | 608 | 448 | 190 | 5 | 125 | 4.92 | 3300 | 4.42 | 487 | 19.2 | 32 | 70.4 | 5.50 | 194.2 | 25.4 | 1 |
| FRD-75R-1 | 75 | 3 | 75 | 3 | 1156 | 1156 | 85 | 5 | 128 | 5.04 | 3100 | 4.15 | 600 | 23.6 | 43 | 94.6 | 5.50 | 194.2 | 25.4 | 1 |
| FRD-100R-1 | 100 | 4 | 100 | 4 | 1823 | 1345 | 55 | 5 | 128 | 5.04 | 3100 | 4.15 | 600 | 23.6 | 43 | 94.6 | 5.50 | 194.2 | 25.4 | 1 |
Tool selection guide
Standard models
| Model | Handle | |
|---|---|---|
| Normal roll handle | Self return type (S) | |
| FRD-20R-21 | 541 205 3265 | 541 205 3267 |
| FRD-20R-22 | 541 205 3269 | 541 205 3271 |
| FRD-23R-21 | 541 205 3273 | 541 205 3275 |
| FRD-23R-22 | 541 205 3277 | 541 205 3279 |
| FRD-25R-11 | 541 205 3282 | 541 205 3284 |
| FRD-28R-11 | 541 205 3288 | |
| FRD-32R-11 | 541 205 3290 | 541 205 3292 |
| FRD-32R-12 | 541 205 3294 | 541 205 3296 |
| FRD-40R-11 | 541 205 3298 | 541 205 3300 |
| FRD-50R-11 | 541 205 3313 | 541 205 3315 |
| FRD-65R-1 | 541 205 3353 | 541 205 3355 |
| FRD-75R-1 E | 541 205 3358 | 541 205 3359 |
| FRD-100R-1 E | 541 205 3250 | |
CE certified models
| Model | Handle |
|---|---|
| Self return type (S) | |
| FRD-20R-21S EC | 541 207 2141 |
| FRD-20R-22S EC | 541 207 2143 |
| FRD-23R-21S EC | 541 207 2148 |
| FRD-23R-22S EC | 541 207 2150 |
| FRD-25R-11S EC | 541 207 2154 |
| FRD-28R-11S EC | 541 207 2157 |
| FRD-32R-11S EC | 541 207 2161 |
| FRD-32R-12S EC | 541 207 2165 |
| FRD-40R-11S EC | 541 207 2168 |
| FRD-50R-11S EC | 541 207 2172 |
| FRD-65R-1S EC | 541 207 2182 |
| FRD-75R-1S EC | 541 207 2234 |
For CE region availability of non CE models,
please inquire to your Fuji representative.
NPT models
| Model | Handle |
|---|---|
| Self return type (S) | |
| FRD-20R-21 N | 541 205 3268 |
| FRD-20R-22 N | 541 205 3272 |
| FRD-23R-21 N | 541 205 3276 |
| FRD-23R-22 N | 541 205 3280 |
| FRD-50R-11 N | 541 205 3314 |
| FRD-75R-1 N | 541 205 3360 |
For possibility of NPT inlet for other models,
please inquire to your Fuji representative.
