FL series
Accumulator Mechanism
The accumulator functions to compensate against the sudden rise of oil pressure when tightening a hard
joint. Torque scatter and error is minimised.
As the oil temperature increases during consecutive tightening, the accumulator takes in the expanded volume
of oil to maintain a consistent oil volume in the pulse unit. This ensures high tightening torque accuracy.
Environmentally Friendly Design
To reduce effects on the environment and environmental energy
during the life cycle of the tool, no paints is applied to th body of
the tool. Consequently, the effect of paint peeling is eliminated.
The fully cover protector is designed as standard.
Ergonomic Design
Compared with conventional tools, weight is kept to a minimum.
The grip handle size is optimised to provide enhanced levels of
operator comfort. This special grip also absorbs vibration more
effectively.
Furthermore, reduced noise and vibration levels are standard with
the FL series due to the optimised dimensions.
Recommended Torque Range, Max Torque
Shows recommended torque range or max torque of the model. Torque figures in the specifications must be used as guidance only, as final
output depends on type and size of bolts and nuts, joint rate and air pressure etc.
PISTOL and straight MODELS (square drive – bit shank) Sq. 6.35 mm (1/4″) ~ 9.5 mm (3/8″) ~ 12.7 mm (1/2″
GLOBAL SPECIFICATIONS
| Model | Recommended Torque Range | Type | Free Speed | Square Drive Size / Bit Shank Size | Overall Length(without socket) | Weight(without socket) | Air Consumption(at Load) | Air Hose Size | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N.m | ft.lb | min-1 | mm | in | mm | in | kg | lb | m3/min | ft3/min | mm | in | ||
| FL-4SD-1 | 6 – 14 | 4.4 – 10.3 | Straight | 5,600 | Hex 6.35 | Hex 1/4 | 210 | 8.27 | 0.85 | 1.87 | 0.4 | 12.7 | 6.3 | 1/4 |
| FL-4D-1 | 14 – 20 | 10.3 – 14.8 | Pistol | 6,700 | Hex 6.35 | Hex 1/4 | 140 | 5.51 | 0.79 | 1.74 | 0.4 | 12.7 | 6.3 | 1/4 |
| FL-5SD-1 | 11 – 24 | 8.1 – 17.7 | Straight | 6,300 | Hex 6.35 | Hex 1/4 | 210 | 8.27 | 0.85 | 1.87 | 0.4 | 14.1 | 6.3 | 1/4 |
| FL-5D-1 | 18 – 32 | 13.3 – 23.6 | Pistol | 6,300 | Hex 6.35 | Hex 1/4 | 140 | 5.51 | 0.79 | 1.74 | 0.4 | 14.2 | 6.3 | 1/4 |
| FL-6SD-1 | 21 – 32 | 15.5 – 23.6 | Straight | 5,600 | Hex 6.35 | Hex 1/4 | 221 | 8.7 | 0.9 | 1.99 | 0.4 | 14.8 | 9.5 | 3/8 |
| FL-6D-1 | 25 – 42 | 18.4 – 31.0 | Pistol | 6,700 | Hex 6.35 | Hex 1/4 | 152 | 5.98 | 0.83 | 1.83 | 0.4 | 14.8 | 9.5 | 3/8 |
| FL-4S-1 | 6 – 14 | 4.4 – 10.3 | Straight | 5,600 | Sq 9.5 | Sq 3/8 | 209 | 8.23 | 0.85 | 1.88 | 0.4 | 12.7 | 6.3 | 1/4 |
| FL-4-1 | 16 – 24 | 11.8 – 17.7 | Pistol | 6,700 | Sq 9.5 | Sq 3/8 | 139.5 | 5.49 | 0.79 | 1.74 | 0.4 | 12.7 | 6.3 | 1/4 |
| FL-5S-1 | 11 – 24 | 8.1 – 17.7 | Straight | 6,300 | Sq 9.5 | Sq 3/8 | 209 | 8.23 | 0.85 | 1.88 | 0.4 | 14.1 | 6.3 | 1/4 |
| FL-5-1 | 20 – 40 | 14.8 – 29.5 | Pistol | 6,300 | Sq 9.5 | Sq 3/8 | 139.5 | 5.49 | 0.79 | 1.74 | 0.4 | 14.1 | 6.3 | 1/4 |
| FL-6S-1 | 21 – 32 | 15.5 – 23.6 | Straight | 5,600 | Sq 9.5 | Sq 3/8 | 221 | 8.7 | 0.9 | 1.99 | 0.4 | 14.8 | 9.5 | 3/8 |
| FL-6-1 | 28 – 56 | 20.7 – 41.3 | Pistol | 6,700 | Sq 9.5 | Sq 3/8 | 151.5 | 5.96 | 0.83 | 1.83 | 0.4 | 14.8 | 9.5 | 3/8 |
| FL-7-1 | 34 – 60 | 25.1 – 44.3 | Pistol | 6,100 | Sq 9.5 | Sq 3/8 | 155 | 6.1 | 1.02 | 2.25 | 0.6 | 21.2 | 9.5 | 3/8 |
| FL-9-1 | 52 – 96 | 38.4 – 70.8 | Pistol | 5,000 | Sq 12.7 | Sq 1/2 | 173 | 6.81 | 1.45 | 3.2 | 0.7 | 23.0 | 9.5 | 3/8 |
| FL-11-1 | 80 – 136 | 59.0 – 100 | Pistol | 5,000 | Sq 12.7 | Sq 1/2 | 184 | 7.24 | 1.8 | 3.97 | 0.8 | 28.3 | 9.5 | 3/8 |
| FL-13-1 | 120 -172 | 88.5 – 127 | Pistol | 3,800 | Sq 12.7 | Sq 1/2 | 192 | 7.56 | 2.1 | 4.63 | 0.9 | 30.0 | 9.5 | 3/8 |
Tool selection guide
Standard models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P (Hole) | BF (Pin) | Short (-1) | Long (-10) | |
| FL-4SD | M5 – M6 | 541 210 2853 | 541 210 2854 | ||
| FL-4D | M6 – M8 | 541 205 2998 | 541 205 2999 | ||
| FL-5SD | M6 – M8 | 541 210 2855 | 541 210 2856 | ||
| FL-5D | M8 | 541 205 3001 | 541 205 3002 | ||
| FL-6SD | M8 | 541 210 2857 | 541 210 2858 | ||
| FL-6D | M8 – M10 | 541 205 3004 | 541 205 3005 | ||
| FL-4S-1 | M5 – M6 | 541 207 1720 | 541 207 1721 | ||
| FL-4-1 | M6 – M8 | 541 207 1712 | 541 205 2997 | ||
| FL-5S-1 | M6 – M8 | 541 207 1731 | 541 207 1732 | ||
| FL-5-1 | M8 | 541 207 1722 | 541 205 3000 | ||
| FL-6S-1 | M8 | 541 207 1743 | 541 207 1744 | ||
| FL-6-1 | M8 – M10 | 541 207 1733 | 541 205 3003 | ||
| FL-7-1 | M8 – M10 | 541 207 1745 | 541 205 3006 | ||
| FL-9-1 | M10 – M12 | 541 207 1749 | 541 205 3007 | ||
| FL-11-1 | M12 – M14 | 541 207 1701 | 541 205 2995 | ||
| FL-13-1 | M12 – M14 | 541 207 1705 | 541 205 2996 | ||
CE certified models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P (Hole) | BF (Pin) | Short (-1) | Long (-10) | |
| FL-4SD | M5 – M6 | 541 210 3002 | 541 210 3003 | ||
| FL-4D-1 | M6 – M8 | 541 207 1718 | |||
| FL-5SD | M6 – M8 | 541 210 3004 | 541 210 3005 | ||
| FL-5D | M8 | 541 207 1728 | 541 207 1730 | ||
| FL-6SD | M8 | 541 210 3006 | 541 210 3007 | ||
| FL-6D-1 | M8 – M10 | 541 207 1739 | |||
| FL-4-1 | M6 – M8 | 541 207 1715 | |||
| FL-5-1 | M8 | 541 207 1725 | |||
| FL-5S-1 | M6 – M8 | 541 210 4715 | |||
| FL-6-1 | M8 – M10 | 541 207 1736 | |||
| FL-7-1 | M8 – M10 | 541 207 1748 | |||
| FL-9-1 | M10 – M12 | 541 207 1752 | |||
| FL-11-1 | M12 – M14 | 541 207 1704 | |||
| FL-13-1 | M12 – M14 | 541 207 1708 | |||
For CE region availability of non CE models, please inquire to your Fuji representative.
NPT models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P (Hole) | BF (Pin) | Short (-1) | Long (-10) | |
| FL-4D | M6 – M8 | 541 205 8931 | 541 205 8932 | ||
| FL-5D | M8 | 541 205 8934 | 541 205 8935 | ||
| FL-6D | M8 – M10 | 541 205 8937 | 541 205 8938 | ||
| FL-4-1 | M6 – M8 | 541 205 8930 | |||
| FL-5-1 | M8 | 541 205 8933 | |||
| FL-6-1 | M8 – M10 | 541 205 8936 | |||
| FL-7-1 | M8 – M10 | 541 205 8939 | |||
| FL-9-1 | M10 – M12 | 541 207 1750 | |||
| FL-11-1 | M12 – M14 | 541 205 8928 | |||
| FL-13-1 | M12 – M14 | 541 205 8929 | |||
For possibility of NPT inlet for other models, please inquire to your Fuji representative.
PISTOL GRIP & Straight models (square drive – bit shank)
Global specifications
| Model | Recommended Torque Range | Type | Free Speed | Square Drive Size / Bit Shank Size | Overall Length(without socket) | Weight(without socket) | Air Consumption(at Load) | Air Hose Size | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N.m | ft.lb | min-1 | mm | in | mm | in | kg | lb | m3/min | ft3/min | mm | in | ||
| FPW-110SD-1 | 2 – 7 | 1.5 – 5.2 | Straight | 3,200 | Hex 6.35 | Hex 1/4 | 224 | 8.82 | 0.65 | 1.43 | 0.2 | 7.1 | 6.3 | 1/4 |
| FPW-110D-1 | 7-11(2-7) | 5.2-8.1(1.4-5.1) | Pistol | 4,500 | Hex 6.35 | Hex 1/4 | 149 | 5.87 | 0.76 | 1.68 | 0.2 | 7.1 | 6.3 | 1/4 |
| FPW-110S-1 | 2-7.5 | 1.5-5.5 | Straight | 3,200 | Sq 9.5 | Sq 3/8 | 218 | 8.58 | 0.65 | 1.43 | 0.2 | 7.1 | 6.3 | 1/4 |
| FPW-110-1 P | 7.5-13(2-7.5) | 5.5-9.6(1.4-5.5) | Pistol | 4,500 | Sq 9.5 | Sq 3/8 | 143 | 5.63 | 0.75 | 1.65 | 0.2 | 7.1 | 6.3 | 1/4 |
| FPW-770S-1 BL | 44 – 76 | 33 – 56 | Straight | 6,300 | Sq 9.5 | Sq 3/8 | 240 | 9.4 | 0.65 | 1.4 | 0.5 | 15.9 | 12.7 | 1/2 |
| FPW-770SC-1 | 33 – 50 | 24 – 37 | Straight | 6,300 | Sq 9.5 | Sq 3/8 | 255 | 10.0 | 0.65 | 1.4 | 0.5 | 15.9 | 12.7 | 1/2 |
| FPW-1660-1 | 160 – 270 | 118-199 | Pistol | 3,000 | Sq 19.0 | Sq 3/4 | 243 | 9.57 | 3.8 | 8.4 | 1.2 | 42.4 | 9.5 | 3/8 |
| FPW-2220S-1 | 300 – 500 | 221-369 | Straight | 2,500 | Sq 19.0 | Sq 3/4 | 350 | 13.8 | 7 | 15.4 | 1.3 | 45.9 | 12.7 | 1/2 |
Tool selection guide
Standard models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P | BF | Short (-1) | Long (-10) | |
| FPW-110SD | M5 | 541 205 3171 | 541 205 3172 | ||
| FPW-110D | M4 – M6 | 541 205 3164 | 541 205 3166 | ||
| FPW-770S-1 | 541 207 2100 | 541 205 3209 | |||
| FPW-770SC-1 | 541 207 2102 | 541 205 3211 | |||
| FPW-110-1 | M4 – M6 | 541 207 2074 | 541 205 3162 | ||
| FPW-1660-1 | M14 – M16 | 541 205 3174 | |||
| FPW-2220S-1 | M16 – M20 | 541 205 3176 | |||
CE certified models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P | BF | Short (-1) | Long (-10) | |
| FPW-110D | M4 – M6 | 541 207 2076 | |||
| FPW-770SC-1 | 541 207 2103 | ||||
| FPW-110S-1 | M4 – M5 | 541 207 2078 | |||
| FPW-110-1 | M4 – M6 | 541 207 2075 | |||
| FPW-1660-1 | M14 – M16 | 541 207 2081 | |||
| FPW-2220S-1 | M16 – M20 | 541 207 2083 | |||
For CE region availability of non CE models, please inquire to your Fuji representative
NPT models
| Model | Bolt Size | Square Drive Retainer | Driver Bit Size | ||
|---|---|---|---|---|---|
| mm | P | BF | Short (-1) | Long (-10) | |
| FPW-110SD | M5 | 541 205 3170 | |||
| FPW-110D | M4 – M6 | 541 205 3165 | |||
| FPW-770S-1 | 541 205 3210 | ||||
| FPW-1660-1 | M14 – M16 | 541 205 3175 | |||
| FPW-2220S-1 | M16 – M20 | 541 207 2082 | |||
For possibility of NPT inlet for other models, please inquire to your Fuji representative.
