Miki Pulley NSE Models
Specifications
| Model | Load range F ［N］ | Max. displacement S1 ［mm］ | Max. displacement S2 ［mm］ | Compatible chain | Mass ［kg］ | |
|---|---|---|---|---|---|---|
| NSE-15 | -35S | 0 to 135 | 50 | 40 | 35 | 0.55 |
| -35D | 0.70 | |||||
| NSE-18 | -35S | 0 to 350 | 50 | 40 | 35 | 0.75 |
| -35D | 0.90 | |||||
| NSE-18 | -40S | 0 to 350 | 50 | 40 | 40 | 0.83 |
| -40D | 1.1 | |||||
| NSE-27 | -50S | 0 to 800 | 65 | 50 | 50 | 2.1 |
| -50D | 2.5 | |||||
| NSE-27 | -60S | 0 to 800 | 65 | 50 | 60 | 2.2 |
| -60D | 2.8 | |||||
| NSE-38 | -80S | 0 to 1500 | 87 | 70 | 80 | 4.5 |
| -80D | 5.4 | |||||
| NSE-45 | -100S | 0 to 2600 | 112 | 90 | 100 | 7.5 |
| -100D | 9.4 | |||||
| NSE-45 | -120S | 0 to 2600 | 112 | 90 | 120 | 8.5 |
| -120D | 10.9 | |||||
*The load range is for the normal position.
Hard position load range ≒ 1.25 x normal position load range
Dimensions
Unit [mm]
| Model | A | B | D | G | H1 | L3 | U | Adjustment range of Y | M | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NSE-15 | -35S | 64 | 25 | 45 | 5 | 100 | 7 | 9 | 19-41 | M8×25 | M10×55 |
| -35D | 24-37 | ||||||||||
| NSE-18 | -35S | 79 | 30 | 58 | 7 | 100 | 7 | 24 | 35-54 | M10×30 | M10×55 |
| -35D | 39-50 | ||||||||||
| NSE-18 | -40S | 79 | 30 | 58 | 7 | 100 | 7 | 24 | 35-54 | M10×30 | M10×55 |
| -40D | 39-50 | ||||||||||
| NSE-27 | -50S | 108 | 50 | 78 | 8 | 130 | 8 | 28 | 41-79 | M12×40 | M12×80 |
| -50D | 47-73 | ||||||||||
| NSE-27 | -60S | 108 | 50 | 78 | 8 | 130 | 8 | 28 | 41-79 | M12×40 | M12×80 |
| -60D | 47-73 | ||||||||||
| NSE-38 | -80S | 140 | 60 | 95 | 10 | 175 | 13 | 40 | 60-97 | M16×40 | M20×100 |
| -80D | 67-90 | ||||||||||
| NSE-45 | -100S | 200 | 70 | 115 | 12 | 225 | 13 | 70 | 90-155 | M20×50 | M20×130 |
| -100D | 108-136 | ||||||||||
| NSE-45 | -120S | 200 | 70 | 115 | 12 | 225 | 13 | 70 | 90-155 | M20×50 | M20×130 |
| -120D | 116-129 | ||||||||||
*For the detailed dimensions of the tensioner section, refer to the dimension table of the SE model.
*Symbol S at the end of size applies for single row of sprocket and D for double rows of sprocket.
*For details on the sprocket idler, refer to the options.
