GN-C SERIES
Embedded Amplifier Photo Sensors
- New type of amplifier built-in photo sensor
- Slim and compact side-on models
- Lightweight and compact Thin, space-saving sensor allowing flexible mounting
- Flat lens less affected by dust or dirt attached Superb stability with the high power (detecting distance of 10 m)
- High-intensity indicators for increased visibility Easy checking of sensor operation from a distance
Specifications
| Models | Flying lead | NPN | GN-T10CR | GN-T7C | GN-M2CR | GN- R40CR | GN- R30C | GN-R7C |
|---|---|---|---|---|---|---|---|---|
| PNP | GN- T10CRPN | GN-T7CPN | GN-M2CRPN | GN- R40CRPN | GN- R30CPN | GN- R7CPN | ||
| Detection | Through beam | Polarized retro reflection | Diffuse reflection | |||||
| Range | 10m | 7m | 0.03 to 1.3m *1 | 400mm | 300mm | 70mm | ||
| Mini. Detecting object | ø6mm Opaque | – | 200 × 200mm White paper | 10 x 10cm White paper | ||||
| Power supply | 12 to 24VDC10%, Ripple 10% Max. | |||||||
| Current consumption | Trns. : 22mA (Max.) Rcvr. : 15mA (Max.) | 25mA (Max.) | ||||||
| Output mode | Output | NPN | Rating : Sink current 100mA (DC30V) Max., Residual voltage 1V Max. | |||||
| PNP | Rating : Source current 100mA (DC30V) Max., Residual voltage 2V Max. | |||||||
| Operating mode | Light-on/Dark-on selectable | |||||||
| Response time | 0.5ms Max. | |||||||
| Operating angle | 10(Receiver side) | 30(Reflector side) | – | |||||
| Hysteresis | – | 10%(Max.) | ||||||
| Light source | Red LED(700nm) | Infrared LED(880nm) | Red LED(640nm) | Infrared LED(880nm) | ||||
| Indicators |
|
|
||||||
| Circuit protection | Short circuit protection built-in | |||||||
| Materials | Case | Polybutyleneteleftarate | ||||||
| Lens | Methacrylic resin | |||||||
| Cable | Flying lead type : 2m, Connector type(-J) : M8 4pin | |||||||
| Weight | Flying lead | Trns, Recv 60g each | 60g | |||||
| Connector | Trns, Recv 10g each | 10g | ||||||
* K71 reflector is used.
