SSP-S200 SERIES
Picking sensor
- Picking sensor for checking and instruction of removing parts from bin
- Thinness of 13mm achieved with rigid metal case
- Large work operation indicator is provided(Job light)
- Faulty work operation indicator is provided(Fault light)
- Retro/Diffuse mode in one sensor
Specifications
| Models | SSP-S204R(-PJ) | SSP-S208R(-PJ) |
|---|---|---|
| Detection | Retro-reflective/Diffuse reflective | |
| Range | Retro-reflective (2m Max.) Diffuse reflective: 700mm (Cartridge paper 300mm × 300mm) 400mm (18% reflectivity gray card) |
|
| No. of optical axis | 4 | 8 |
| Detection width | 100mm | 225mm |
| Power supply | 12 to 24VDC ±10 %, Ripple 10 % (Max.) | |
| Current consumption | 68mA(12VDC) 42mA(24VDC) |
78mA(12VDC) 48mA(24VDC) |
| Output mode | NPN / PNP output selectable Rating : Current 50mA (30VDC)Max. Residual voltage 2V or less |
|
| Operating mode | Normal open/Normal close selectable | |
| Job indicator input | Non-contact or contact input Operating voltage : NPN 2V or less/ PNP 4V or more |
|
| Response time | 120ms or less | |
| Light source | Red LED(Wave-length 640nm) | |
| Indicators | Sensitivity indicator (Green/Orange) / Operating indicator(Orange) Job indicator (Green)/ Fault indicator(Red) |
|
| Job indicator | Flickering | |
| Short circuit protection | Built-in | |
| Material | Enclosure: Aluminum, Lens : Polycarbonate, End plate: Resin | |
| Wiring | Flying lead (Outer dia.F4.1) 2 m length 0.2mm 2 ×4 cores(Black) (-J : M12 connector type) |
|
| Incidental function | Automatic initialization function/ Automatic re-initialization function | |
| Weight | 120g | 180g |
Environmental Characteristics
| Ambient light | 10,000 lx (Max.) | |
|---|---|---|
| Operating temperature | -10°C to +50°C (Storage:-25°C to +70°C) | |
| Operating humidity | 35 to 85 %RH | |
| Enclosure protection | IP 62 | |
| Vibration resistance | 10Hz to 55Hz, 1.5mm Amplitude,2 hours, X,Y and Z directions | |
| Shock resistance | 500 m/s 3 times X,Y and Z directions | |
| Dielectric strength | 1,000VAC for 1 minute | |
| Insulation resistance | Min.20 MΩ(at 500VDC) |
