TSUBAKI Corrosion Resistant Conveyor Chain
SS Series
Provides superior corrosion, chemical, heat and cold resistance over DS Series. (Uses 300 series stainless steel)
Operating temperature range: -20°C to 400°C
* Contact a Tsubaki representative when using below -20°C.
Reference Number System
| RF03075 |
R |
– |
SS |
– |
1L |
A2 |
| (1) |
(2) |
|
(3) |
|
(4) |
(5) |
(1) Chain size
(2) Roller type: R = R roller, F = F roller, S = S roller, M = M roller, N = N roller
(3) Series
(4) Attachment spacing
(5) Attachment type
Table of Sizes and Strength
- GMaximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain. This value will differ by manufacturer and is not a guaranteed value.
- Contact a Tsubaki representative regarding average tensile strength.
Meter
| Size |
Pitch (mm) |
Max. allowable load (kN) |
| RF03075 |
75 |
2.80 |
| RF03100 |
100 |
| RF05075 |
75 |
5.70 |
| RF05100 |
100 |
| RF05125 |
125 |
| RF05150 |
150 |
| RF08125 |
125 |
5.70 |
| RF08150 |
150 |
| Size |
Pitch (mm) |
Max. allowable load (kN) |
| RF10100 |
100 |
9.00 |
| RF10125 |
125 |
| RF10150 |
150 |
9.00 |
| RF12200 |
200 |
11.0 |
| RF12250 |
250 |
| RF17200 |
200 |
15.5 |
| RF17250 |
250 |
| RF17300 |
300 |
| Size |
Pitch (mm) |
Max. allowable load (kN) |
| RF26200 |
200 |
20.8 |
| RF26250 |
250 |
| RF26300 |
300 |
| RF26450 |
500 |
Inch
| Size |
Pitch (mm) |
Max. allowable load (kN) |
| RF430 |
101.6 |
4.00 |
| RF204 |
66.27 |
5.70 |
| RF450 |
101.6 |
5.70 |
| RF650 |
152.4 |
5.70 |
| Size |
Pitch (mm) |
Max. allowable load (kN) |
| RF214 |
101.6 |
10.3 |
| RF205 |
78.11 |
10.3 |
| RF6205 |
152.4 |
11.0 |
| RF212 |
152.4 |
15.5 |
