APISTE ENC-AR2940L
ENC-AR2940L
Corresponds to the power 400V, Suitable for various plant and equipment overseas
| Cooling capacity (w) | 2600/2900 |
|---|---|
| Voltage Rating (v) | Three phase AC380~415/AC400~460 |
| Mount type | Side mount |
| External dimension | H1380×W450×D280 |
| Volume (Kg) | 68 |
| Mount Type | Side-mount |
|---|---|
| Cooling Capacity (W) | 2600/2900 |
| Setting Temperature Range (°C) | 25~45 |
| Use Area Temperature (°C) | 20~55 |
| Use Area Humidity (%RH) | 10-85（No condensation） |
| External Dimensions (mm) | H1380×W450×D280 |
| Volume (kg) | 68 |
| Coating Color | Color Munsell 5Y7 / 1 light beige |
| Voltage Rating (V) | Three phase AC380~415/AC400~460 |
| Consumption Current/Rating (A) | 2.8/2.9 |
| Consumption Current/MAX (A) | 3.3/3.7 |
| Starting Current (A) | 20/18 |
| Consumption Voltage/Rating (W) | 1300/1750 |
| Consumption Voltage/MAX(W) | 1800/2300 |
| Noise Resistance | Fast Transient / LEVEL4 by burst immunity test |
| Vibration Resistance | 5Hz frequency 20mm total amplitude |
| Dust & Water Protection Grade | Equivalent to IP54 (internal circulation route) |
| Coolant | R-134a 340g |
| Noise (dB) | 75/79 |
| External Output | Cooling operation output, alarm output (a non-voltage contact: Resistive load 250V 2A) |
| Display | LED RUN LED display / temperature error in the panel |
| Regulatory Compliance | CE marking, the Electrical Appliance and Material Safety Law |
| Environmental Response | RoHS |
Note:
Cooling capacity: 35°C ambient temperature, the value of the rated capacity when the set temperature 35°C inside the panel. (Method: JIS-C-9612 air enthalpy measurement conditions)
Ambient humidity / ambient temperature is not meant to satisfy all conditions in temperature and humidity.
Rated value: 35°C ambient temperature, ambient humidity RH 40% value at the time of use.
RH 40% when the value of the maximum allowed ambient temperature, ambient humidity using an ambient temperature of use: The value MAX.
Please read instructions carefully before use, please use properly.
Dimension Drawing
Cut Mounting
ENC-AR2940L
Standard panel cut (left) Diagram is viewed from the outside control panel.When processing, please keep the thread pitch.
There are (with some exceptions), the panel cut dimensions can be changed without prior notice minimum standard panel cut, but will not change even after the model change.
Panel cut half buried (right)
ability characteristic graph
Cooling capacity measurement conditions characteristic graph
ENC-AR2240L When using maximum allowable ambient temperature in an environment close to the FA cooler, please consult our sales representative.
