EBARA Corporation LPD Series In-Line Pump

Because it is in-line type addition lightweight one small, I do not take the floor space and can be mounted to the middle of the pipe.
I adopt a low noise all outdoor electric motor to form two electric motor. It does not matter the indoor and outdoor location. (Except for the three-phase 0.15kW models and single-phase all models)
3 piping as it is, disassembly and inspection of the pump is possible.
4 high temperature (100 ℃), (push pressure can be used to {7.0kgf/cm³} best 0.69MPa high pressure, making it ideal as a circulation pump.
because it employs a mechanical seal to 5 shaft seal, maintenance is easy.

Standard Specifications
Model		25LPD		32 ~ 80LPD
Handling liquid		Shimizu 0 ~ 100 ^oC. this pump will fit the “standards of water quality of water supply equipment” by the Water Supply Act.
The suction total head		-6m: (20 ^oC) (diameter 80-5.5m) at an internal discharge amount range selector chart
Standard acceptable pushing pressure		0.2Mpa {2kgf / c ㎡}		Please see the particulars table.
Structure	Impeller	Closed
	Shaft seal	Mechanical seal
	Bearing	Sealed ball bearings (electric flight)
Connection	Suction side	Gas pipe union		JIS 10K type (thin)
Connection	Discharge side	Gas pipe union		1.5kW or less of 32-50 caliber: (thin) JIS 10K form models other than the above: JIS 10K type (average)
Material	Casing	FC200
	Impeller	SUS304		1.5kW or less of 32-50 caliber: SUS304 models other than the above: CAC406
	Main shaft	SUS304 (wetted parts)
Electric motor	Ministers and the number of poles	Single-phase, 2-pole	Three-phase, 2-pole	Single-phase, 2-pole	Three-phase, 2-pole
	Voltage	100V	200V	100V	200V
	Format	Drip-proof protection form	Drip-proof protection form	Drip-proof protection form	All 閉防 pine type (outdoor)
Location		Indoor	Indoor	Indoor	Indoor and outdoor