SaniForce 1590 3A High Sanitation Diaphragm Pump
High Sanitation Diaphragm Pump
1-1/2 inch air-operated double diaphragm sanitary pump with flow rates up to 90 gpm (341 lpm). 3A certified for the
dairy industry.
Mounted on a floor stand and equipped with a leak detector, the 1590 3A food grade pump can be rotated 360º for easy draining.
Our SaniForce 1590 3A sanitary pump is designed to meet the stringent sanitation requirements of the dairy industry.
Available in CE1935/2004 – check manual for configuration
Features
- Pumps up to 90 gallons per minute (341 lpm)
- Pump rotates 360º for easy draining
- Certified by 3A for dairy applications
- Features our lube free, non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles – up to 15,000 cps
- Suitable to pump products such as: flowable sour cream, yogurt and light-viscosity cheeses
- Electronic leak detector is standard on 3A models
- Designed to detect leaks caused when a diaphragm fails
- Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
- Uses an optical and conductivity sensor to ensure the utmost reliability
- Powered by either 24v or 110/220v
- Approved for 3A applications
- Easy cleaning with smooth, flat surfaces and no recessed areas
- No exposed diaphragm plates to reduce contaminant collection
Specifications
| SaniForce 1590 HS and 1590 3A Diaphragm Pumps | |
|---|---|
| Maximum fluid working pressure | 120 psi |
| Air pressure operating range | 20–120 psi |
| Maximum air consumption | 125 scfm |
| Air consumption at 70 psi, 60 gpm | 50 scfm |
| Maximum free-flow delivery | 100 gpm |
| Maximum pump speed | 200 cpm |
| Gallons/liters per cycle* | 0.5 g |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) |
28 ft wet, 15 ft dry |
| Maximum size pumpable solids | 5/8 in |
| Air inlet size | 0.5 in npt(f) |
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 90 dB(A) |
| Sound power level | 103 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 85dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings |
|
| PTFE | 220°F |
| Santoprene® | 180°F |
| 3A Approved EPDM | 275°F |
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. |
|
| Wetted materials on all models | 316 stainless steel, 3A Approved EPDM, PTFE |
| Wetted materials depending on model | 3A Approved EPDM, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, polyester (labels), LDPE foam (gasket) |
| Weight | |
| All Models | 97 lb |
Download PDF
SaniForce 1590 HS Diaphragm Pump
High Sanitation Diaphragm Pump
1-1/2 inch air-operated double diaphragm sanitary pump with a 32 Ra finish and flow rates up to 90 gpm (341 lpm)
Ideal for applications that benefit from the convenience of a quick knockdown design, Graco’s 1590 HS sanitary pumps can
be disassembled in five minutes or less. Available in ball and flapper designs, with 1.5 inch, 2 inch, 3 inch and 4 inch
tri-clamp connections.
Available in CE1935/2004 – check manual for configuration
Features
- Pumps up to 90 gpm (341 lpm)
- Pump rotates 360º for easy draining
- Easy to clean, quick knockdown, rotating design
- Features our lube free, non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles – up to 15,000 cps
- Suitable to pump products such as: fruit filling, spaghetti sauce, muffin and cake batter, oils and lotions
- Fewer moving parts
- Three-way pilot valve for true non-sticking operation
- Externally serviceable for quick, inexpensive repairs
- Elimination of o-rings and spool valve prevents problems associated with competitive pumps
- Overmolded diaphragm plate with PTFE on the fluid side and EPDM on the air side on Graco’s PTFE/EPDM diaphragms
so there’s no place to harbor bacteria - Improve wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Longer diaphragm life in abrasive applications that still require PTFE
- Available on the SaniForce 1040, 1590, 2150 and SaniForce HS 1590 and 3150
Specifications
| SaniForce 1590 HS and 1590 3A Diaphragm Pumps | |
|---|---|
| Maximum fluid working pressure | 120 psi |
| Air pressure operating range | 20–120 psi |
| Maximum air consumption | 125 scfm |
| Air consumption at 70 psi, 60 gpm | 50 scfm |
| Maximum free-flow delivery | 100 gpm |
| Maximum pump speed | 200 cpm |
| Gallons/liters per cycle* | 0.5 g |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) |
28 ft wet, 15 ft dry |
| Maximum size pumpable solids | 5/8 in |
| Air inlet size | 0.5 in npt(f) |
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 90 dB(A) |
| Sound power level | 103 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 85dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings |
|
| PTFE | 220°F |
| Santoprene® | 180°F |
| 3A Approved EPDM | 275°F |
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. |
|
| Wetted materials on all models | 316 stainless steel, 3A Approved EPDM, PTFE |
| Wetted materials depending on model | 3A Approved EPDM, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, polyester (labels), LDPE foam (gasket) |
| Weight | |
| All Models | 97 lb |
Download PDF
SaniForce 3150 3A Double Diaphragm Pump
High Sanitation Double Diaphragm Drum
Up to a 4.0 inch tri-clamp connection, this easy to clean, quick knockdown air-operated double diaphragm sanitary
pump has flow rates up to 150 gpm (568 lpm) and is 3A certified
The SaniForce 3150 3A double diaphragm pump is designed to meet the stringent sanitation requirements of the dairy industry.
Mounted on a floor stand and equipped with a leak detector, the 3150 3A sanitary pump can be rotated 360° to drain any excess
sanitation chemicals.
Available in CE1935/2004 – check manual for configuration
Features
- Pumps up to 150 gpm (568 lpm)
- Pump rotates 360° for easy draining
- The only 3 inch pump certified by 3A for dairy applications
- Featuring our lube free, non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles – up to 20,000 cps
- Suitable to pump products such as: flowable sour cream, yogurt and flowable cheese spreads
- Electronic leak detector is standard on the 3150 3A models
- Designed to detect leaks caused when a diaphragm fails
- Sounds a built-in audio alarm and signals external shut down of the pump to prevent damage
- Uses an optical and conductivity sensor to ensure the utmost reliability
- Powered by either 24v or 110/220v
- Approved for 3A applications
- Easy cleaning with smooth, flat surfaces and no recessed areas
- No exposed diaphragm plates to reduce contaminant collection
Specifications
| SaniForce 3150 HS and 3150 3A Diaphragm Pumps | |
|---|---|
| Maximum fluid working pressure | 120 psi |
| Air pressure operating range | 20–120 psi |
| Maximum air consumption | 175 scfm |
| Air consumption at 70 psi, 60 gpm | 50 scfm |
| Maximum free-flow delivery | 150 gpm |
| Maximum pump speed | 145 cpm |
| Gallons/liters per cycle* | 1.0 g |
| Air inlet size | 0.5 in npt(f) |
| Maximum suction lift | |
| Flapper | 10 ft wet, 5 ft dry |
| Ball | 18 ft wet, 9 ft dry |
| Maximum size pumpable solids | |
| Flapper | 2.5 in |
| Ball | 1.0 in |
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 90 dB(A) |
| Sound power level | 103 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 85 dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings | |
| PTFE | 220°F |
| Santoprene® | 180°F |
| Buna-N | 180°F |
| Fluoroelastomer | 250°F |
| 3A Approved EPDM | 275°F |
| Fluid inlet size | 2.0 in sanitary flange |
| Fluid outlet size | 2.0 in sanitary flange |
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. |
|
| Wetted materials on all models | 316 stainless steel, 3A Approved EPDM |
| Wetted materials depending on model | Buna–N (Nitrile), Fluoroelastomer, 316 stainless steel, 3A Approved EPDM, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, polyester (labels), LDPE foam (gasket) |
| Weight | |
| All Models | 145 lb |
Download PDF
SaniForce 3150 HS Double Diaphragm Pump
High Sanitation Double Diaphragm Pump
Up to a 4 inch tri-clamp connection, this sanitary pump is designed for applications that benefit from the convenience
of a quick knockdown design. Maximum flow rates up to 150 gpm (568 lpm).
The ease of disassembly of the fluid ends, large porting, and high flow capacity, makes the SaniForce 3150 HS sanitary pump
perfect for your high volume application needs. Designed for applications that benefit from the convenience of quick
knockdown design, but may not require leak detection.
Available in CE1935/2004 – check manual for configuration
Features
- Pump rotates 360º for easy draining
- Passes solids up to 1 in (25 mm) in diameter
- Easily converted in to a 3150 sanitary flapper pump with optional kit
- Stainless steel wetted and fluid center sections
- Features Graco’s durable, lube-free non-sticking air valve
- Transfer product from a variety of containers to smaller receptacles – up to 20,000 cps
- Suitable to pump products such as: fruit filling, spaghetti sauce, muffin and cake batter, oils and lotions
- Overmolded diaphragm plate with PTFE on the fluid side and EPDM on the air side on Graco’s PTFE/EPDM diaphragms
so there’s no place to harbor bacteria - Improve wear and diaphragm life with no exposed diaphragm plate on the fluid side
- Longer diaphragm life in abrasive applications that still require PTFE
- Available on the SaniForce 1040, 1590, 2150 and SaniForce HS 1590 and 3150
Specifications
| SaniForce 1590 HS and 1590 3A Diaphragm Pumps | |
|---|---|
| Maximum fluid working pressure | 120 psi |
| Air pressure operating range | 20–120 psi |
| Maximum air consumption | 125 scfm |
| Air consumption at 70 psi, 60 gpm | 50 scfm |
| Maximum free-flow delivery | 100 gpm |
| Maximum pump speed | 200 cpm |
| Gallons/liters per cycle* | 0.5 g |
| Maximum suction lift (varies widely based on ball/seat selection and wear, operating speed, material properties, and other variables) |
28 ft wet, 15 ft dry |
| Maximum size pumpable solids | 5/8 in |
| Air inlet size | 0.5 in npt(f) |
| Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 90 dB(A) |
| Sound power level | 103 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 85dB(A) |
| Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and o-ring temperature ratings |
|
| PTFE | 220°F |
| Santoprene® | 180°F |
| 3A Approved EPDM | 275°F |
| Wetted Parts*** | |
| All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. |
|
| Wetted materials on all models | 316 stainless steel, 3A Approved EPDM, PTFE |
| Wetted materials depending on model | 3A Approved EPDM, PTFE, Santoprene |
| CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, polyester (labels), LDPE foam (gasket) |
| Weight | |
| All Models | 97 lb |
Download PDF
SaniForce Meat & Poultry Flapper Pump
Air-Operated Double Diaphragm Pump
Graco’s high sanitation double diaphragm pump is designed specifically for the food processing industry. Handles
solids up to 2.5 inches (6.3 cm) in diameter.
Graco’s sanitary double diaphragm flapper pump was developed specifically for the food processing industry. With an easy
to clean, quick knockdown design, Graco’s poultry pump is a sure fit for pet food manufacturers and meat and poultry
processing plants.
Available in CE1935/2004 – check manual for configuration
Features
- Handles solids up to 2.5 inches (6.3 cm) in diameter
- FDA-compliant
- Features Graco’s durable, lube-free non sticking air valve
- Transfer product from a variety of containers to smaller receptacles – up to 20,000 cps
- Ideal for applications such as pet food manufacturers, meat manufacturers and poultry processing plants
