MOS-C
Flexible coupling – Oldham – type – Set screw type/Clamping type
Dimension Drawing
Dimensions/Specifications/CAD
Part Number | A | L | W | E | F | G | M | Wrench Torque (N・m) |
---|---|---|---|---|---|---|---|---|
MOS-12C | 12 | 5 | 14.9 | 6 | 2.5 | 4 | M2 | 0.5 |
MOS-16C | 16 | 7 | 21 | 8 | 3.5 | 5 | M2.5 | 1 |
MOS-20C | 20 | 7 | 22.1 | 10 | 3.5 | 6.5 | M2.5 | 1 |
MOS-25C | 25 | 8 | 27.2 | 14 | 4 | 9 | M3 | 1.5 |
MOS-32C | 32 | 10 | 33.3 | 18 | 5 | 11 | M4 | 2.5 |
Part Number | Max. Bore Diameter (mm) | Rated Torque* (N・m) | Max. Torque* (N・m) | Max. Rotational (min-1) | Static Torsional Stiffness (N・m/rad) | Max. Lateral Misalignment (mm) | Max. Angular Misalignment (°) | Mass** (g) |
---|---|---|---|---|---|---|---|---|
MOS-12C | 5 | 0.2 | 0.4 | 52000 | 9 | 0.6 | 2 | 3 |
MOS-16C | 6 | 0.4 | 0.8 | 39000 | 30 | 1 | 2 | 8 |
MOS-20C | 8 | 0.7 | 1.4 | 31000 | 47 | 1.3 | 2 | 13 |
MOS-25C | 10 | 1.2 | 2.4 | 25000 | 85 | 1.5 | 2 | 24 |
MOS-32C | 14 | 2.8 | 5.6 | 19000 | 190 | 2 | 2 | 48 |
*Adjustment of rated and max. torque specifications for load fluctuations is not required.
However, if operating temperature exceeds 30℃, please adjust rated torque and max. torque as detailed in the table below.
The operational temperature range for MOS is -20℃ to 80℃. For more detailed information, please refer to Selection Guidelines [PDF 171KB].
**Based on the max. shaft bores.
Part Number | Stock Bores D1-D2 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 5 | 6 | 6.35 | 7 | 8 | 10 | 11 | 12 | 14 | |
MOS-12C | ● | ● | ● | – | – | – | – | – | – | – | – |
MOS-16C | ● | ● | ● | ● | – | – | – | – | – | – | – |
MOS-20C | – | – | ● | ● | ● | ● | ● | – | – | – | – |
MOS-25C | – | – | – | – | ● | ● | ● | ● | – | – | – |
MOS-32C | – | – | – | – | ● | – | ● | ● | ● | ● | ● |
●All products come with set screws (MOS) or cap screws (MOS-C).
●Tolerance of shaft bore on MOS-8 is H8.
●Recommended tolerance for shaft diameters is h6 and h7.
●Bore and keyway modifications are available on request. Please take advantage of our bore modification services.
For more information please refer to Custom Bore Modifications [PDF 495KB].
Material/Finish
MOL/MOL-C/MOS/MOS-C | |
---|---|
Hub | A2017 Alumite Treatment |
Spacer | Polyacetal |
Hex Socket Set Screw | SCM435 Ferrosoferric oxide film |
Hex Socket Head Cap Screw | SCM435 Ferrosoferric oxide film |
Structure
Set Screw type
MOL Outside diameter φ16-φ32 MOL,MOL-C
MOL Outside diameter φ40-φ63
MOS MOS MOS-C
Clamping type
MOL-C Outside diameter φ16-φ32 MOL,MOL-C
MOL-C Outside diameter φ40-φ63
MOS-C MOS MOS-C
Characteristics
- Applicable motors
MOL MOS Servomotor – – Stepping Motor ○ ○ General-purpose motor ◎ ◎ ◎: Excellent ○: Very good
- Property
MOL MOS Allowable Misalignment ◎ ◎ Electrical insulation ◎ ◎ Allowable operating temperature -20℃ to 80℃ -20℃ to 80℃ ◎: Excellent ○: Very good
- This is an oldham-type flexible coupling.
- Slippage of hubs and a spacer allows large eccentricity and angular misalignment to be accepted.
- The load on the shaft generated by misalignment is small and the burden on the shaft is reduced.
- It has electrical insulation.
- Standard type MOL and short type MOS are available.
Application
Parts feeder/Transport device
Ambient Temperature / Temperature Correction Factor
Ambient temperature | Temperature correction factor |
---|---|
-20℃ to 30℃ | 1.00 |
30℃ to 40℃ | 0.80 |
40℃ to 60℃ | 0.70 |
60℃ to 80℃ | 0.55 |
Comparison of rated torque