KII/KIIS Series

Increase in the strength of the gear raises the maximum permissible torque to twice the torque when compared with conventional models. A torque range that was unavailable can now be used.

The strength of the permissible radial load and the permissible axial load is twice that of the conventional model.

The large bore bearing used for this model extends the gearhead’s rated life to 10,000 hours, which is twice that of the conventional model. This reduces the maintenance work for the device.

Noises from motor/gearhead contact have been reduced by 6 dB compared with the conventional standard motor.

A slim terminal box is used to make wiring work easier. The box is slimmer than conventional products. The cable outlet can be changed by 90 degrees to four different directions. The slim terminal box type conforms to the IP66 rating degree of protection. (Except the installation surface of the round shaft type)

By combining with an inverter, you can control the speed in a wide range from the low speed at 3 Hz to the high speed at 120 Hz. Even at a low speed, high torque is produced. In addition, less variation under loads enables more stable speed control.

For easy use of an inverter, we provide, for your reference, the “Speed – Torque characteristics” and “Parameter settings for the inverter” when this product is combined with an inverter of another manufacturer. For details, contact our customer support center.

With less heat generation and vibration of the motor, achieved by reduced losses, the reliability of the device has increased.

Operates in a fan-less structure. The reduction in loss has reduced the heat generation in the motor. Therefore, the K Series’s single-phase 220/230 VAC 50 Hz type and the K S Series do not require the cooling fan that was installed in the conventional models of 60 W or higher, resolving the problem of raising dust