CO2 Laser Marker LP-400
Performance, functionality, quality, operability.
The high-grade LP-400 CO2 laser marker delivers, meeting needs ranging from marking to processing.
UL/C-UL , CE , FDA Approved
CE : Low Voltage Directive, EMC Directive ((LP-4-C only)
UL : Approved Listing (LP-4-A only)
FDA : LP-4-A only
Features
High-speed marking at 700 cps
Three times the productivity means you save time and equipment.
Acceleration, deceleration and response speeds of the LP-400 series exceed those of previous models by at least 200 %. It is possible to mark on products that are moving rapidly. The LP-400 series that can mark 700 characters per second reduces tact time, leading to more than three times the productivity of previous models.
* Excluding 10 W type
Clear marking and high-quality processing
Stability of laser output
With a laser output stability of within ± 3 % (typ.)*, 10.6 μm 0.417 mil wavelength models work well in applications ranging from marking thin films and other tricky substrates to processing tasks such as removing insulation from cables.
* Excluding 10 W type
Short-wavelength laser
Clear marking
Well-matched to the heat absorption characteristics of plastics, the 9.3 μm* 0.366 mil wavelength laser allows marking on plastic surfaces by melting the surface layer without creating excessively deep marking and limiting damage to the substrate. This capability rectifies issues with previous models where deep marking would create pinholes or otherwise make marking output difficult to read.
* LP-420S9 (20 W type)
High-quality processing
Short-wavelength laser radiation is readily absorbed by plastics, allowing the creation of sharp edges and increasing dimensional accuracy.
RSS (GS1 DataBar) code support
The LP-400 series supports RSS (GS1 DataBar) and Composite codes, allowing product codes and other information to be output in a space-efficient manner on small medical products such as ampoules and vials. Both normal and reversed (white on a black background) marking modes are supported.
Freedom of installation
Space-saving design (tower head models)
At 175 x 230 mm 6.9 x 9.1 in, the tower head is smaller than a B5 sheet of paper. Tower head models require less space for installation and can be integrated into existing production line space.
Rotating head design (standard models)
A unique head design that rotates freely through 350° allows the laser marker to be installed even in a vertical orientation. Flexible installation options make it easy to fit the system into a variety of production environments.
A full line-up
A full line-up meets the needs of diversified production lines. Two types of laser wavelengths are available for tower head models and standard models. In addition, it is possible to select areas of 55 x 55 mm 2.2 x 2.2 in to 160 x 160 mm 6.3 x 6.3 in due to the three types of marking areas.
Easily set by using a computer with the “Laser Marker NAVI” software
The LP-400 series come standard with application software for easily configuring print data. Marking layout can be easily performed as desired with intuitive and simple mouse operations. Moreover, batch control of multiple laser markers is possible using one computer. This significantly contributes to increased work efficiency.
Laser Marker NAVI included softwares
Extraordinarily easy to use color LCD equipped console [LP-ADP40 (optional)]
The LP-400 series laser markers can be operated using a commercially-available monitor and mouse instead of console as equipped with the VGA connector and mouse connector.
Convenient features meet a variety of needs
- USB connectors
- Easy marking of Adobe® Illustrator® data
Printed circuit boards
Transistors
Product packaging
PET bottles
Coaxial cable
Coaster (naming)
Rubber gaskets (processing)?
Removal of ribbon cable insulation (processing)
| Type | General-purpose type | |||
|---|---|---|---|---|
| Set model No. | Standard models | LP-430U | LP-420S9U | LP-410U |
| Tower head models | LP-430TU | LP-420S9TU | LP-410TU | |
| Marking laser | Class 4 CO2 laser | |||
| Average output (Note 1) |
30 W | 20 W | 10 W | |
| Wavelength | 10.6 ?m 0.417 mil | 9.3 ?m 0.366 mil | 10.6 ?m 0.417 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | |||
| Marking field | 110 x 110 mm 4.3 x 4.3 in | |||
| Work distance (Note 2) | 185 mm 7.3 in | |||
| Scan speed | Max. 12,000 mm/sec. | |||
| Line speed (Note 3) | 240 m/min. or less | 170 m/min. or less | ||
| Marking setting (character height, width) |
0.2 to 110 mm 0.008 to 4.3 in (variable in 0.001 mm 0.00004 in steps) |
|||
| Marking spacing (character spacing, line pitch) |
0 to 110 mm 0 to 4.3 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180? to +180? (variable in 0.01? steps) |
|||
| Marking shape | Straight Line, Arc, Proportional, Justify | |||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | |||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN (EAN) / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | |||
| 2D codes | QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix | |||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | |||
| Logos / Shape | VEC (Note 4), BMP, DXF, HPGL, JPEG, AI (Note 5), EPS (Note 5) | |||
| Interface(Note 6) | RS-232C, Ethernet | |||
| Cooling method | Forced air cooling | |||
| Power supply | 90 to 132 V AC or 180 to 264 V AC (automatic switching), | |||
| 50 / 60 Hz | ||||
| Power | 100 V AC | 1,000 VA or less | 670 VA or less | |
| consumption | 200 V AC | 1,200 VA or less | 700 VA or less | |
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | |||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | |||
| Marking condition | Still, moving | |||
| Functions | +Marking order optimization | |||
| +Intersection correction | ||||
| +Counter marking | ||||
| +Current date marking | ||||
| +Deadline date marking | ||||
| +Lot marking | ||||
| +Logo data marking | ||||
| +Font creation and editing | ||||
| +Monospaced alignment | ||||
| +Updating of operating screen display | ||||
| +System offset | ||||
| +Shared character settings | ||||
| +Guide laser | ||||
| +Dual pointers | ||||
| +Focus adjustment | ||||
| +Overlapping marking | ||||
| +Backup | ||||
| +Marking on long moving objects | ||||
| +Font selection | ||||
| +Bold marking | ||||
| +Proportional marking | ||||
| +Marking image display | ||||
| +Marking time measurement | ||||
| +Target object image display | ||||
| +Operator adjustment | ||||
| +Rank marking | ||||
| +Offset marking | ||||
| +Time hold | ||||
| +Step and repeat | ||||
| +I/O check monitor | ||||
| +I/O simulation | ||||
| +Error log display | ||||
| +Serial data marking | ||||
| +Power and speed configuration by row or logo file | ||||
| Emergency stop switch | Located on controller | |||
| Ambient temperature | 0 to +40 ? +32 to +104 ? (Storage: -10 to +60 ? +14 to +140 ?) (No dew condensation or icing allowed) |
|||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |||
| Net weight | Standard head | 20 kg | 16 kg | |
| Tower head | ||||
| Controller | 12 kg | 11 kg | ||
Notes:
1) Independent output of oscillator.
2) Work distance varies by approx. ?2 mm ?0.079 in from model to model.
3) Varies by target object.
4) VEC is a usable format of logo file for laser marker.
5) The PC installed Adobe? Illustrator? 9.x to CS5 (Windows) is necessary.
6) Ethernet has been changed from production in March 2013.
| Type | Small-spot type | |||
|---|---|---|---|---|
| Set model No. | Standard models | LP-431U | LP-421S9U | LP-411U |
| Tower head models | LP-431TU | LP-421S9TU | LP-411TU | |
| Marking laser | Class 4 CO2 laser | |||
| Average output (Note 1) |
30 W | 20 W | 10 W | |
| Wavelength | 10.6 ?m 0.417 mil | 9.3 ?m 0.366 mil | 10.6 ?m 0.417 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | |||
| Marking field | 55 x 55 mm 2.2 x 2.2 in | |||
| Work distance (Note 2) | 111 mm 4.4 in | |||
| Scan speed | Max. 6,000 mm/sec. | |||
| Line speed (Note 3) | 120 m/min. or less | 85 m/min. or less | ||
| Marking setting (character height, width) |
0.2 to 55 mm 0.008 to 2.2 in (variable in 0.001 mm 0.00004 in steps) |
|||
| Marking spacing (character spacing, line pitch) |
0 to 55 mm 0 to 2.2 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180? to +180? (variable in 0.01? steps) |
|||
| Marking shape | Straight Line, Arc, Proportional, Justify | |||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | |||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN (EAN) / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | |||
| 2D codes | QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix | |||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | |||
| Logos / Shape | VEC (Note 4), BMP, DXF, HPGL, JPEG, AI (Note 5), EPS (Note 5) | |||
| Interface (Note 6) | RS-232C, Ethernet | |||
| Cooling method | Forced air cooling | |||
| Power supply | 90 to 132 V AC or 180 to 264 V AC (automatic switching),50 / 60 Hz | |||
| Power | 100 V AC | 1,000 VA or less | 670 VA or less | |
| consumption | 200 V AC | 1,200 VA or less | 700 VA or less | |
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | |||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | |||
| Marking condition | Still, moving | |||
| Functions | +Marking order optimization | |||
| +Intersection correction | ||||
| +Counter marking | ||||
| +Current date marking | ||||
| +Deadline date marking | ||||
| +Lot marking | ||||
| +Logo data marking | ||||
| +Font creation and editing | ||||
| +Monospaced alignment | ||||
| +Updating of operating screen display | ||||
| +System offset | ||||
| +Shared character settings | ||||
| +Guide laser | ||||
| +Dual pointers | ||||
| +Focus adjustment | ||||
| +Overlapping marking | ||||
| +Backup | ||||
| +Marking on long moving objects | ||||
| +Font selection | ||||
| +Bold marking | ||||
| +Proportional marking | ||||
| +Marking image display | ||||
| +Marking time measurement | ||||
| +Target object image display | ||||
| +Operator adjustment | ||||
| +Rank marking | ||||
| +Offset marking | ||||
| +Time hold | ||||
| +Step and repeat | ||||
| +I/O check monitor | ||||
| +I/O simulation | ||||
| +Error log display | ||||
| +Serial data marking | ||||
| +Power and speed configuration by row or logo file | ||||
| Emergency stop switch | Located on controller | |||
| Ambient temperature | 0 to +40 ? +32 to +104 ? (Storage: -10 to +60 ? +14 to +140 ?) (No dew condensation or icing allowed) |
|||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | |||
| Net weight | Standard head | 20 kg | 16 kg | |
| Tower head | ||||
| Controller | 12 kg | 11 kg | ||
Notes:
1) Independent output of oscillator.
2) Work distance varies by approx. ±2 mm ±0.079 in from model to model.
3) Varies by target object.
4) VEC is a usable format of logo file for laser marker.
5) The PC installed Adobe® Illustrator® 9.x to CS5 (Windows) is necessary.
6) Ethernet has been changed from production in March 2013.
| Type | Wide-area type | ||
|---|---|---|---|
| Set model No. | Standard models | LP-435U | LP-425S9U |
| Tower head models | LP-435TU | LP-425S9TU | |
| Marking laser | Class 4 CO2 laser | ||
| Average output(Note 1) | 30 W | 20 W | |
| Wavelength | 10.6 ?m 0.417 mil | 9.3 ?m 0.366 mil | |
| Guide laser / pointer | Class 2 semiconductor laser; wavelength: 655 nm 0.026 mil | ||
| Marking field | 160 x 160 mm 6.3 x 6.3 in | ||
| Work distance (Note 2) | 262 mm 10.3 in | ||
| Scan speed | Max. 12,000 mm/sec. | ||
| Line speed (Note 3) | 240 m/min. or less | ||
| Marking setting (character height, width) |
0.2 to 160 mm 0.008 to 6.3 in (variable in 0.001 mm 0.00004 in steps) |
||
| Marking spacing (character spacing, line pitch) |
0 to 160 mm 0 to 6.3 in (variable in 0.001 mm 0.00004 in steps) Arced output: -180? to +180? (variable in 0.01?steps) Arced output: -180? to +180? (variable in 0.01?steps) |
||
| Marking shape | Straight Line, Arc, Proportional, Justify | ||
| Character types | English uppercase letters, english lowercase letters, numerals, katakana, hiragana, kanji (JIS No. 1 and No. 2 standards), symbols, user-registered characters (up to 50) | ||
| Barcodes | Code 39, Code 128, ITF, NW-7, JAN (EAN) / UPC, RSS-14 (GS1 DataBar), RSS (GS1 DataBar) Limited, RSS (GS1 DataBar) Expanded | ||
| 2D codes | QR Code, Micro QR Code, Data Matrix, GS1 Data Matrix | ||
| Composite codes | RSS-14 (GS1 DataBar) CC-A, RSS-14 (GS1 DataBar) Stacked CC-A, RSS (GS1 DataBar) Limited CC-A, etc. | ||
| Logos / Shape | VEC (Note 4), BMP, DXF, HPGL, JPEG, AI (Note 5), EPS (Note 5) | ||
| Interface (Note 6) | RS-232C, Ethernet | ||
| Cooling method | Forced air cooling | ||
| Power supply | 90 to 132 V AC or 180 to 264 V AC (automatic switching),50 / 60 Hz | ||
| Power | 100 V AC | 1,000 VA or less | |
| consumption | 200 V AC | 1,200 VA or less | |
| Inputs | Remote, trigger, encoder (A), encoder (B), shutter control, laser excitation, alarm reset, emergency stop, laser stop, etc. | ||
| Outputs | Power supply (+12 V), remote, marking ready, marking, marking complete, laser excitation, warning, alarm, configuration complete, counter complete | ||
| Marking condition | Still, moving | ||
| Functions | +Marking order optimization | ||
| +Intersection correction | |||
| +Counter marking | |||
| +Current date marking | |||
| +Deadline date marking | |||
| +Lot marking | |||
| +Logo data marking | |||
| +Font creation and editing | |||
| +Monospaced alignment | |||
| +Updating of operating screen display | |||
| +System offset | |||
| +Shared character settings | |||
| +Guide laser | |||
| +Dual pointers | |||
| +Focus adjustment | |||
| +Overlapping marking | |||
| +Backup | |||
| +Marking on long moving objects | |||
| +Font selection | |||
| +Bold marking | |||
| +Proportional marking | |||
| +Marking image display | |||
| +Marking time measurement | |||
| +Target object image display | |||
| +Operator adjustment | |||
| +Rank marking | |||
| +Offset marking | |||
| +Time hold | |||
| +Step and repeat | |||
| +I/O check monitor | |||
| +I/O simulation | |||
| +Error log display | |||
| +Serial data marking | |||
| +Power and speed configuration by row or logo file | |||
| Emergency stop switch | Located on controller | ||
| Ambient temperature | 0 to +40 ? +32 to +104 ? (Storage: -10 to +60 ? +14 to +140 ?) (No dew condensation or icing allowed) |
||
| Ambient humidity | 35 to 85 % RH (No dew condensation or icing allowed) | ||
| Net weight | Standard head | 20 kg | |
| Tower head | |||
| Controller | 12 kg | ||
Notes:
1) Independent output of oscillator.
2) Work distance varies by approx. ±2 mm ±0.079 in from model to model.
3) Varies by target object.
4) VEC is a usable format of logo file for laser marker.
5) The PC installed Adobe® Illustrator® 9.x to CS5 (Windows) is necessary.
6) Ethernet has been changed from production in March 2013.
Controller
LP-430U LP-420S9U LP-431U LP-421S9U LP-435U LP-425S9U
LP-430TU LP-420S9TU LP-431TU LP-421S9TU LP-435TU LP-425S9TU
LP-410U LP-411U
LP-410TU LP-411TU
Console
