Controller
Specification
| Power Source | AC100 – 115V or AC200 – 230V |
|---|---|
| Motor Capacity | 50W, 100W, 200W, 400W, 750W |
| Operation Temperature | 5 – 40°C |
| Operation Humidity | 5 – 85%RH Non-condensing |
| Protection Level | Sufficient IP20 |
| Safty Standard | RoHS |
| Input/Output | Source(PNP) / Sync(NPN) |
| Weight | Max 9.5kg |
Specification
| Power Source | AC100 – 115V or AC200 – 230V |
|---|---|
| Motor Capacity | 50W, 100W, 200W, 400W, 750W,1.0kW, 2.0kW |
| Operation Temperature | 5 – 40°C |
| Operation Humidity | 5 – 85%RH Non-condensing |
| Protection Level | Sufficient IP44 |
| Safty Standard | RoHS |
| Input/Output | Source(PNP) / Sync(NPN) |
| Weight | 400W and under:Max.9kg 750W and over:Max 15kg |
Filling Mode
Dispensing a liquid specified volume with one shot signal.
| Function | Description | F510 | F120 |
|---|---|---|---|
| Adjustment volume | Adjusting for quantity variance automatically with input actual dispense volume. *1 | x | x |
| Dispnse Finish Signal | Output dispense finished signal when dispensing end. | x | x |
| Counting Dispense | Display numbers of discharging on the panel. | x | x |
| Repeat Dispensing | Repeat dispensing with specified cycle. | x | x |
*1 Accuracy of adjustment depends on operating conditions.
Applying Mode
Keeping Dispensing a liquid until input signal to stop.
| Function | Description | F510 | F120 |
|---|---|---|---|
| Adjustment volume | Automatically adjustment dispensing volume of star and stop point without changing a program of a robot. *2 | x | x |
*2 Requiring changes a program of a robot under applying conditions.
Others
| Function | Description | F510 | F120 |
|---|---|---|---|
| Change mode | Changing mode with a signal from a host system. | x | – |
| Pattern Memory | Memorizing speed, volume, and some parameters of each filling and applying mode. | x 60 |
x 20 |
| Pattern Change | Changing memorized patterns with a binary code signal from a host system. Properties can be changed at the same time. | x | – |
| Controlling feeder | Monitering and display the actual pressure of a pressure sensor attached on the Heishin Dispenser. The controller emits a signal of start-and-stop operation of a feed pump when specified pressure. | x | – |
| Key Lock | Preventing erroneous key operation on the front panel. | x | – |
| Monitoring | Monitering operating time and the number of start and stop. Emitting alert when specified time and number of times. | x | x |
| Alarm | Providing an alert signal when error occurring and under low pressure. Memorizing occurring error and its time. | x 1000 |
x 128 |
| I/O Check | Confirming I/O from a host system on the panel. | x | x |
