Contact Level Indicator
CAPACITANCE TYPE KLI/KLT/KLG
This level meter continuously measures capacitance variations between the sensing unit and the tank wall. Regardless of measurement targets, sensors suitable for use conditions can be selected from a wide variety of the product family. (High temperature, high pressure, strong acid, strong alkali, conductive, insulating, etc.)
SOUNDING BOB TYPE KSL Series
Standard for storage management!When a start signal is input, the motor is activated, the metering tape is winded off, and the weight is lowered. When the weight reaches the measured substance, the motor is stopped and the level measurement value is output.
RADAR TYPE(Time Domain Reflectometry) VF
It irradiates microwaves via the probe to achieve stable detection without being affected by dust particles, vapors, and obstacles in the tank.
VERTICAL FLOAT TYPE KF-100 Series
The float is the only moving part of the meter.The inside of the meter is composed of the resistance and read switch.As the magnet in the float closes the read switch according to fluctuations of the liquid level, the change in the liquid level is detected as a change in the resistance.The meter is not affected by changes of properties and environments including vapors and gases.
DOLPHIN SENSOR TYPE KF-900 Series
This absolute type linear water level indicator uses a magnetostrictive wire. Ultrasonic vibrations propagated in the magnetostrictive wire are detected at the magnetizing body, and an analog signal is output in proportion to the position of the magnetizing body.
Non-Contact Level Indicator
RADAR TYPE VG7 Series
This noncontact type level meter uses microwaves. The maximum measurement value is 40 m. The measurement is not affected even if the measured substance is changed. ATEX Eexia (Intrinsic Safety Explosion-proof)
ULTRASONIC TYPE REFLEX/MULTIFLEX/MINIFLEX LR
This noncontact type level meter uses ultrasonic waves. It supports scanning as well as long-distance measurement (powder: up to 35 m, liquid: up to 50 m).
ULTRASONIC TYPE(Liquid Level Indicator) LU Series
This two-wire ultrasonic type level meter is intended for liquids. Obstacles in the tank are recognized as digital images. Specific areas can be measured by cutting unnecessary noise and filtering output adequately.
LASER TYPE LASER RANGE-L/-S Series
This noncontact type level meter is intended for long-span and pinpoint measurement. It is most suitable for places difficult to measure and dangerous places such as high elevations.