Tsubaki LMEB Series Lift Master (Ball Screw Type)
Tsubaki’s Ball Screw Type is suitable for high frequency operations, such as on assembly lines.
RoHS compliant
Features of the Ball Screw Type Lift Masters
High Efficiency
Using the ball screw makes this type efficient and provides a large thrust from a small drive source.
High Speed
High-speed operations can be realized since they are more efficient than machine screw types.
Lifting speed up to 500mm/s available. Contact a Tsubaki representative for more information.
Long Service Life
Operating life is predictable thanks to the use of a highly reliable ball screw. Provides long life operation.
Tsubaki standard products use a brake motor.
Units are not self-locking and so require a brake mechanism.
Reference Number System of Ball Screw Type
| LME | B | 0500 | H | 10 | G |
| (1) | (2) | (3) | (4) | (5) | (6) |
(1) LME: Lift Master Standard Series
(2) B: Ball Screw Type
(3) Rated Load: 0200 = 1.96kN {200kgf}, 0500 = 4.90kN {500kgf}, 1000 = 9.80kN {1000kgf}
(4) Speed
(5) Stroke: 04 = 400mm, 06 = 600mm, 08 = 800mm, 10 = 1000mm, 12 = 1200mm, 15 = 1500mm
(6) Drive Unit: G = Hypoid Motor (w/ Brake)
| Rated Load | Speed | ||
|---|---|---|---|
| S | H | U | |
| 0200 | 25/30 | 100/120 | – |
| 0500 | – | 62/75 | 125/150 |
| 1000 | – | 62/75 | 125/150 |
Standard Model List of Ball Screw Type
| Model | LMEB0200 | LMEB0500 | LMEB1000 | ||||
|---|---|---|---|---|---|---|---|
| Speed Mark | S | H | H | U | H | U | |
| Speed | 50/60Hz [mm/s] |
25/30 | 100/120 | 62/75 | 125/150 | 62/75 | 125/150 |
| Rated Load | [kN] {kgf・m} |
1.96 {200} | 4.90 {500} | 9.80 {1000} | |||
| Allowable OHL | [N・m] {kgf・m} |
588 {60} | 1960 {200} | 4900 {500} | |||
| Stroke | [mm] | 400, 600, 800, 1000, 1200, 1500 | |||||
| Motor Capacity | [kW] | 0.1 | 0.4 | 0.75 | 1.5 | 1.5 | 2.2 |
| Position Detection Sensor | Stroke upper and lower limit 2 positions (4 positions for “S” speed) |
||||||
- For “H” speed, “U” speed, set acceleration/deceleration time at inverter operation.
- Distance between work piece mounting face and the position of the center of gravity
Common Specifications
| Motor Power | Voltage | 3φ 200/200/220V |
|---|---|---|
| Frequency | 50/60/60Hz | |
| Brake | Off brake | |
| Operating Conditions | Ambient Temperature | 0 – 40°C (No freezing) |
| Relative Temperature | 90% or less (No condensation) | |
| Atmosphere | Indoors (Away from direct sunlight) No corrosive or flammable gas Away from water and oil, no dust |
|
| Finishing Specs | Acrylic lacquer enamel finish | |
| Paint Color | B27-90B (Cream color) | |
