TSUBAKI Power-Lock®
KE Series
Compatible with a wide range of shaft tolerances
- Standard
- Electroless Nickel-Plated
- Stainless Steel
- Low Contact Pressure type
RoHS compliant
Locking Principles and Features
- Designed to suit a wide range of shaft tolerances (except for KP models). Standard models can accommodate plus shaft tolerances of servomotors, etc.
- Excellent for locking small shafts, such as the output shafts of servomotors and small stepping motors.
- The stainless steel (SS) and electroless nickel-plated (KP) models require no oil/grease lubrication at the time of installation.
- Allows for more compact design, with the smaller difference between the inner and outer diameters, than with the AE Series.
- Introducing a new Low Contact Pressure type that can be used with small diameter hubs.
Structure
The KE Series Power-Locks are simply constructed of the followings three parts: inner and outer rings, and a few locking bolts. Simply tighten these bolts to achieve a completely secure connection.
Model Numbers & Specifications
Standard/Electroless Nickel-Plated
Model No. | Shaft Diameter Range | Transmissible Torque | |
---|---|---|---|
N・m | kgf・m | ||
KE/KE-KP Series | φ5 to φ100 | 7.5 to 9900 | 0.77 to 1010 |
Stainless Steel Models
Model No. | Shaft Diameter Range | Transmissible Torque | |
---|---|---|---|
N・m | kgf・m | ||
KE-SS Series | φ5 to φ50 | 5.0 to 836 | 0.51 to 85.3 |
Low Contact Pressure type
Model No. | Shaft Diameter Range | Transmissible Torque | |
---|---|---|---|
N・m | kgf・m | ||
KE-LP Series | φ5 to φ100 | 6.3 to 8290 | 0.64 to 846 |
Reference Number System
PL | 005 | X | 016 | KE |
(1) | (2) | (3) | (4) |
(1) PL = Power-Lock
(2) Shaft Diameter: mm
(3) Outer Diameter: mm
(4) Type:
KE = KE Series Standard
KE-SS = KE Series Stainless Steel
KE-KP = KE Series Electroless Nickel-Plated
KE-LP = KE Series Low Contact Pressure type