TSUBAKI Top chain accessories
Transfer Plates for WT5707-K Chain

Accessory that utilizes the full features of WT5707-K Plastic Modular Chains.

Combining raised rib type and modular chains eliminates the gaps in transfer areas.

• Material: Reinforced polyamide
• Plate length: 220mm

Features & Points of Caution

• Combining raised rib type and modular chains eliminates the gaps in transfer areas.
• Prevents entangling and catching, enables smoother transfers.

*This is a made to order item.
*Each transfer plate comes with two caps and mounting screws.

Installing transfer plates

See below regarding installation of transfer plates.

Model No.	B (mm)	D (mm)
WT-TP5707-L220	82	Dp/2 + 15.5

• Dp = Pitch diameter
• Use transfer plates with raised rib type chain.

Installing the caps and mounting screws

Attach transfer plate caps and mounting screws of transfer plate as shown on the right.
Also, adjust installation position of mounting screws in response to operating temperature conditions to allow for thermal expansion of the chain.
*See below

Under ambient temperatures (20°C) with no temperature changes
Install mounting screws for transfer plates 2 and 3 at the center of the long hole.

Under low temperatures conditions
Install mounting screws for transfer plates 2 and 3 closer to the center of the chain.

Under high temperatures conditions
Install mounting screws for transfer plates 2 and 3 closer to the end of the chain.

Reference Number System

(1) Model No.
(2) Simplified code: TP = Transfer Plate
(3) Chain model number
(4) Plate length: L220 = 220mm