Valcom P3MBP Series
Make to order
Excessive High Pressure Transducer (High Accurate)
- Ultrahigh pressure: 5000~15000 bar / High accurate: 0.2~0.5%R.C.(Varies with the range.)
- Good reliability and stability.
- Measurement of changes in static/dynamic pressures, peak pressure and pressure fluctuation.
- Protection rating IP67 (Compliant with DIN 40050, IEC 529)
| Measured medium | Water, oil, gases or other media that will not corrode SUS630. |
|---|---|
| Pressure type | Positive pressure can be measured. |
| Rated capacity | 5000,10000,15000bar |
Specification (Mechanical input characteristics)
| Pressure type | Absolute pressure | |
|---|---|---|
| Principle of Measurement | Strain gauge | |
| Rated Capacity | 5000,10000,15000bar | |
| Initial Value | 0bar | |
| Operating Range at Reference Temperature | 120% | |
| Overload Limit at Reference Temperature | 120% | |
| Test Pressure | 5000bar:200% 10000bar:130% 15000bar:100% | |
| Destructive Range | 5000bar:>200% 10000bar:>130% 15000bar:>100% | |
| Max. Dynamic Pressure (*1) | 5000bar:>100% 10000bar:>70% 15000bar:>55% | |
| Destructive Range | Permissible Vibration Amplitude (*1) | 5000bar:3500bar 10000bar:5000bar 15000bar:6000bar |
| Natural Frequency of the Membrane | >100kHz | |
| Dead Volume (Approximation) | 5000bar:615mm3 10000bar:150mm3 15000bar:100mm3 | |
| for Included Packing (5000bar only) | 5000bar:200mm3 | |
| Control Volume | 1mm3 | |
| Material | of the Parts In Contact with the Measurement Medium | 5000bar:1.4301,1.4542 10000,15000bar:1.4542 |
| of the Parts In Contact with Environment | 1.4542, 1.4301, Nickel plating brass | |
- *This is a made-to-order model. Contact our sales office for details.
- (*1) As per DIN 50 100 (Load cycle: 107 times)
Specification (Output characteristics)
| Signal Span(Sensitivity) | 1mV/V | |
|---|---|---|
| Sensitivity Tolerance | 5000bar:<±0.3% 10000bar:<±0.6% 15000bar:<±0.8% | |
| Temperature Effect on Zero Balance (*1) | In the Norminal Temperature Range | 5000bar:±0.1% 10000bar:±0.2% 15000bar:±0.2% |
| In the Operating Temperature Range | 5000bar:±0.15% 10000bar:±0.25% 15000bar:±0.25% | |
| Temperature Effect on Load (*1) | In the Norminal Temperature Range | 5000bar:±0.1% 10000bar:±0.2% 15000bar:±0.2% |
| In the Operating Temperature Range | 5000bar:±0.3% 10000bar:±0.4% 15000bar:±0.4% | |
| Characteristic Curve Deviation | 5000bar:0.2% 10000bar:0.4% 15000bar:0.5% | |
| Repeatability to DIN1319 | <±0.05% | |
| Normal Excitation Voltage | Normal(Rated)Excitation Voltage | 2.5V |
| Operating Range | 0.5~10V | |
| Input Resistance at Reference Temperature | 350±5Ω | |
| Output Resistance at Reference Temperature | 350±1.5Ω | |
| Isolation Resistance at 100V AC | 5000MΩ | |
Specification (Ambient environment)
| Reference Temperature | +23°C | |
|---|---|---|
| Nominal Temperature Range | -10~+80°C | |
| Limiting Temperature Range | -40~+100°C | |
| Storage Temperature Range | -50~+100°C | |
| Impact Resistance (Test condition as per DIN 40046) | Impact Acceleration | 1000m/s² |
| Impact Duration | 4ms | |
| Impact Form | Half sine wave | |
Specification (Mechanical specification)
| Pressure Connection 1-P3MB | M20×1.5 58°C Sealing cone packing(*3) | |
|---|---|---|
| Electrical Connection | ERA.2E.310.SLL(LEMO Japan, Ltd.) | |
| Bending Radius | Static | 35mm |
| Dynamic | 75mm | |
| Mounting Position | Desired position | |
| Size | φ25×123mm | |
| IP Rating | IP67 | |
| Weight | 200g(Cable excluded) | |
| Accessories | Double cone seal (×1) | |
(*3) Only the mode rated 5000 bar uses the packing.
