Valcom VF Series
Miniature Flush type Pressure Transducer
- Small design (G1/8 thread)
- High accurate (Non Linearity: ±0.5%R.O.)
- Suitable for measurement of viscous media since the flush type (no feed port) wetted part is hardly clogged up.
- Wetted part constructed integral with diaphragm does not use any sealed liquid, offering durability, reliability and long life.
| Measured medium | Water, oil, gases or other media that will not corrode SUS630. |
|---|---|
| Pressure type | Positive pressure can be measured. |
| Rated capacity | 1~50MPa |
Specification
| Rated Output(R.O.) | Approx. 1mV/V |
|---|---|
| Non Linearity | 0.5%R.O. |
| Hysteresis | 0.5%R.O. |
| Excitation;Recommended | 6V |
| Excitation;Maximum | 10V |
| Zero Balance | ±0.6mV/V |
| Input Terminal Resistance | 100MΩ or more |
| Output Terminal Resistance | 350±10Ω |
| Insulation Resistance (*1) | 350±10Ω |
| Compensated Temperature Range (Temperature of medium to be measured) |
0~70°C(No condensation or freezing) |
| Safe Temperature Range (Temperature of medium to be measured) |
-5~80°C(No condensation or freezing) |
| Safe Overload Rating | 150%R.O. |
| Temperature Effect on Zero Balance | ±0.8%R.C./10°C |
| Temperature Effect on Load | ±0.8%R.C./10°C |
| Pressure Port Material | SUS630 |
| IP Rating | Equivalent to IP65 |
| Cable | 4.5-4-core shielded cable |
| Weight | 50g(Cable not included) |
| Accessories | Copper packing(×1) |
(*1) Applied voltage:50V
