For air floating free Bear unit
Accurate, jig smooth transport is required, mold, work. Air – force in transport 360 ° at will of a floating free Bear unit if one ton transport of a slight 0.2 ~ 0.3KN (20 ~ 30Kgf) . Positioning is also done in a short period of time.
In addition, the air – you can maintain a clean working environment because it uses.
While transport-seating of the weight object is thought of
ON of the air valve, lift up the transported material with a force Furibea of air by the OFF operation.
Jig, you can easily and speedy transport and exact positioning of the work at a fraction of the force.
This is quite useful in combination and press die transport and setting of the assembly work line.
By supplying air to the unit, built-in Furibea floats, lift the transported material.
Start-up friction resistance (μ) it will be possible to move the conveyed object 360 ° freely at 3/100 or less of power.
If you stop the supply of air, transported material is seated to bolster by its own weight.
Piping example
※ Please use the vacuum generator as shown in the figure above is the case for forcibly lowering the cylinder.
Rich product variations to choose
Able choose depending on the purpose and use, the environment and conditions,
offers a wealth of product variations.
Single item as well, it is also possible to combine more than one product.
Furibea incorporated in each piston by supplying compressed air rises in unison. By applying a rectangular groove processing in the machine of the bed at the time of installation, jig, mold, it can transport and positioning of the work.
▼ 3836 series▼ 5050 series▼ 5050W Series▼ 2525-18▼ 3232-14▼ 5036M-12▼ 7570-7▼ 3843D / 5057D Series
Without performing the angular groove processing, you can insert and use in existing T groove.
It can be inserted only when necessary, is easy to retrofit to the machine with no possible lifter function used in the insertion and removal.
▼ 1625 series▼ 1932/2544 Series
The type of built-in unit the roller to rise and fall in the air operating.
Compared to the free bare unit, start-up friction resistance to the direction of rotation of the roller (μ) is small, ideal for use in change of direction and a right angle transfer of line.
▼ roller unit series
The hole drilling to the existing cushion pin hole or machine bed, is the type of Furibea single spring working to use embedded.
▼ spring-cushion series
Also available design and development of custom-made
What you want your in Furibea, want shape, size you want, according to the want applications, also supports a complete made-to-order. Please do not hesitate to contact us.
Handy not require large-scale construction work
In the case of T-slot type, without performing the angular groove processing, it can be used and inserted into the existing T groove.
Since it is the adjustment of the height it does not take the trouble and cost of processing the device itself.
When the depth of the T-groove is large, 
please use to adjust the height of the body and put a spacer between the (shim plate) to the department. (T are common to groove insertion type.)
※ shim plate will be available at our company (paid)
(Corner groove type use example)
