TSUBAKI General Use / Wear Resistant / Heavy
DT Series
Advanced version of the DT Series that offers better wear resistance (advanced model)
Has 3x the bush-roller wear resistance of DT Series. DTA Series chains are available with R and F rollers only.
Operating temperature range: -20°C to 200°C
Reference Number System
| RF03075 | R | – | DTA | – | 1L | A2 |
| (1) | (2) | (3) | (4) | (5) |
(1) Chain size
(2) Roller types: R = R roller, F = F roller
(3) Series
(4) Attachment spacing
(5) Attachment type
Features
DTA Series has better bush-roller wear resistance than DT series.
Bush-roller wear resistance
Wear comparison over the same period
| Bush comparison | Roller comparison | |
|---|---|---|
| DTA Series |  |
 |
| DT Series |  |
 |
Table of Sizes and Strength
- Maximum allowable load is a value calculated based on Tsubaki in-house standards and is calculated strength. As long as there are no other constraints, maximum allowable load is used in selecting large size conveyor chain. This value will differ by manufacturer and is not a guaranteed value.
- Contact a Tsubaki representative for average tensile strength.
Meter
| Size | Pitch (mm) | Maximum allowable load (kN) |
|---|---|---|
| RF03075 | 75 | 4.20 |
| RF03100 | 100 | |
| RF05075 | 75 | 9.80 |
| RF05100 | 100 | |
| RF05125 | 125 | |
| RF05150 | 150 | |
| RF08125 | 125 | 11.2 |
| RF08150 | 150 | |
| RF10100 | 100 | 17.6 |
| RF10125 | 125 | |
| RF10150 | 150 | |
| RF12200 | 200 | 26.6 |
| RF12250 | 250 |
| Size | Pitch (mm) | Maximum allowable load (kN) |
|---|---|---|
| RF17200 | 200 | 35.0 |
| RF17250 | 250 | |
| RF17300 | 300 | |
| RF26200 | 200 | 44.9 |
| RF26250 | 250 | |
| RF26300 | 300 | |
| RF26450 | 500 | |
| RF36250 | 250 | 68.0 |
| RF36300 | 300 | |
| RF36450 | 450 | |
| RF36600 | 600 |
