TSUBAKI Plastic Modular Chain
WT1515G-M Series
Small pitch chain — perfect for conveying small conveyors.
Expanded line-up: Now in 100mm width.
- WT1515G-M: Closed type
(with tab guide attachments)
Features
New 100mm width type
Now easier to replace flat belt conveyors because chains are available in the same 50mm and 100mm widths these conveyors use.
With tab guide attachments
Perfect for single filers with different speeds on the right and left sides.
No dead plate (straight layout)
Enables straight layouts with no dead plates. Less space and fewer motors are required compared to when using curved belts, and there is no need to adjust the transfer (height) upstream and downstream of the conveyor.
No dead plate (straight layout)
Enables straight layouts with no dead plates. Less space and fewer motors are required compared to when using curved belts, and there is no need to adjust the transfer (height) upstream and downstream of the conveyor.
2 motors/Where transfer is adjusted: 1 location
3 motors/Where transfer is adjusted: 2 locations
2 motors/Where transfer is adjusted: height gap
○: Where transfer is adjusted
Line-up
Closed type with tab guide attachments
Chain width: 50mm
Closed type with tab guide attachments
Chain width: 100mm
* Cannot use bearing type nose bars
Reference Number System
| WT | 15 | 15 | G | – | M | 50 | – | ALF |
| (1) | (2) | (3) | (4) | (5) | (6) | (7) |
(1) Model
(2) Chain pitch: 15 = 15mm
(3) Type
(4) G: With tab guide attachments
(5) M: Fixed width
(6) Plate width: 50 = 50mm, 100 = 100mm
(7) Series code*: ALF = Ultra-low friction and wear resistant, LFG = Low friction
Notice: Integration of ULF Series with ALF Series
- We will be integrating ULF Series Plastic Top Chain with ALF Series on orders from April 2017.
- We will be integrating ALF Series with ULF Series Plastic Modular Chain and Plastic Block Chain on orders from June 2017.
- Contact a Tsubaki representative for more information regarding ULF Series after integration.
* ALF Series (ultra-low friction and wear resistant series) dramatically reduces the amount of wear debris generated from sliding with running rails (ultra high molecular weight polyethylene) under non-lubricated conditions while maintaining the same ultra low coefficient of friction coefficient as the conventional ULF Series.
