IKEUCHI SCBIMV series nozzles
Ultra-Co MPact Size, Small Capacity Fine Fog Nozzles/ Flat Spray
| Thread standard | Pipe conn. size | M3 depth 2.5 (*1) M3 depth 3 (*2) | |
|---|---|---|---|
| Standard pressure | – | Spray angle | 45° – 110°(*3) |
| Spray capacity | 0.25 – 4 ℓ/hr, Normal | Supply air type | Compressed air |
| Liquid feeding system | Liquid pressure | Mean droplet diameter | 20 – 100 μm |
| Air consumption | 2.6 – 12.4N ℓ/min | Air pressure | 0.2 – 0.4 MPa |
| Free passage diameter | 0.1 – 0.3 mm(*4) |
Features
Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 100 μm or less (*5).
Ultra-compact size. About 42 mm in total length including control adaptor.
Features large turn-down ratio under liquid pressures of 0.1-0.3 MPa.
Produces two different spray distributions; uniform spray distribution throughout spray pattern area (when spraying at a low air-water ratio), and a mountain-shaped distribution having gradually tapered edges (at a high air-water ratio).
Three spray angles of 110ﾟ, 80ﾟ, and 45ﾟ are available.,
Spray ON/OFF can be regulated by switching the pilot air ON/OFF (type SP) or by turning compressed air ON/OFF (type SN).
*1) Inlets for compressed air and pilot air. (No pilot air for the adaptor type SN)
*2) Liquid inlet.
*3) Measured at compressed air pressure of 0.3 MPa and liquid pressure of 0.1 MPa.
*4) Free passage diameter of spray orifice.
*5) Measured by Laser Doppler Method.
Applications
Spraying: Mold release agent, lubricant, deodorant (trash pit, refuse collector, inlet conduit), oil, surface treatment agent, rust preventive, honey, insecticide, aqueous urea, etc.
Cooling: Dies, gas, glass, steel plates, steel pieces, moldings, automobile bodies, plastic products, etc.
Moisture control: Paper, gas, ceramics, concrete, etc.
Cleaning: Printed circuit boards, glass tubes, etc.
Others: Dust suppression, Catalyst denitration, etc.
Industries in which this nozzle is used
Steelmaking, Electronics, Paper & pulp, Printing, Food, Automotives
Product specifications
| Structure | • Comprising 4 parts : Spray tip, core, cap, and adaptor. • Connecting adaptorｓ (spray ON/OFF control adaptors) are available from the type SP or SN. • Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type : compressed air flows in the center of the nozzle, while liquid flows along its circumference). • Liquid pressure type. |
|---|---|
| Material | • Nozzle body, others: S303 • Packing: FKM |
