OHM MIST CATCH Electrostatic Oil Mist Collector OMC-E21
Features
- Long lasting initial performance
- No filter used. Eliminates time and cost for filter replacement!
- No waste of used filters.
- 99% or more collection efficiency!
- Less stress on the electrode enabled by centrifugal separation of larger particles as a primary step.
- Small sized electrode makes cleaning easy.
- Effective for both oily and water-soluble mist.
- For φ125 duct hose connection, an optional flange is necessary. Choose either OMC-023-1 or OMC-E022-1. See the option list for OMC-E21.The casters with adjuster foot shown in the picture are also an option.
Specifications
| Model | OMC-E21 |
|---|---|
| Rated voltage | Three phase 200VAC±10% |
| Max. air volume | 8/10m3/min |
| Collection efficiency | 99% or more |
| Collectable oil mist | Oily and water-soluble particles |
| Motor output | 0.2kW |
| Rated current | 1.7/2.0A or less |
| Working temperature | 0 to +40℃ |
| Working humidity | 10%RH to 80%RH (Free from condensation) |
| Noise (Characteristic A) | 75dB |
| Drain port | Pipe of 18mm dia. |
| High-voltage output(switchable)HV | DC -9kV、-8kV、-7kV |
| High-voltage output(switchable)LV | DC -6kV、-5kV、-4kV |
| Max. absorption mist concentration | 150mg/m3 |
| Max. absorption temperature | +40℃ |
| Ozone concentration | Less than 0.04ppm |
| Contact capacity | Alarm output 1c (Spark discharge, Short-circuited at high voltage) 200VAC 2A, 30VDC 2A |
| Safeguard | High voltage cutoff when door is open High voltage cutoff in the event of high voltage short circuit High voltage cutoff in the event of frequent spark discharges |
| Display | Power (White), Operation (Orange), Electrode check (Red) |
| Environmental standard | – |
| Weight | 44.0kg |
| Accessories | Drain hose (2m) with hose band (1 pc.) Instruction manual |
Rated frequency (50/60Hz)
