Santest GY Series – GYAF1 Probe
Flat head, analogue output
Reversed output or bipolar output can be supported as well. The flat head permits a miniaturized application, and the flange makes the installation easier, compared with the conventional screw type probes.
Specifications
| Non-linearity | ≦±0.025%FS TYP |
|---|---|
| Resolution | ≦0.01%FS |
| Repeatability | ≦±0.01%FS |
| Temp. drift | ≦±40ppmFS/°C |
| Voltage output | 0-10V or 10-0V (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20m or 20-4mA (load:Max.500Ω) |
| Alarm output | not available |
| Power supply | +24(±2)VDC (100mA) |
| Sampling freq. | Std 1kHz(up to stroke 1000mm) |
| Max. Pressure | 35MPa(probe rod) |
| Operating temp. | -20°C-+80°C |
| Storage temp. | -40°C-+80°C |
| Vibration | 6G(or 40Hz 2mmPP) |
| Shock | 50G(2msec) |
| IP grade | IP67(option:IP68) |
・The above mentioned accuracy applies to sensors with an effective stroke of 300 mm or more.
Model No.
①Effective stroke
15-3000mm
②Thread dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
③Tip dead zone
S:70mm/90mm/100mm(STD)
・S (STD length) depends on the selected magnet or float in ⑤.
| tip DZ | magnet | float |
|---|---|---|
| 70mm | M2PN,M0SM,M0LM,M3,M11N | F25N,F28N |
| 90mm | F28S,F30S | |
| 100mm | T144,T163 | F40S,F42S,F50S |
□:□mm(option)(specified by customers)
④Thread/Rod diameter
F :flange, rod Φ10(STD)
⑤Associated magnet or float
| magnet | float |
|---|---|
| M2PN :No.2PN (STD) M0SM :No.ΦSPM M0LM :No.ΦLPM M3 :No.3 M11N :No.11N |
F28S :Φ28 SS316 F30S :Φ30 SS316L F40S :Φ40 SS316(B) F42S :Φ42.5 SS316 F50S :Φ50 SS316 F54S :Φ54 SS304 F25N :RF-A10 plastic F28N :RF-A6 plastic FL□ :other float |
⑥Cable connection
CN:connector(STD)
△G□F:pigtail / cable end : free
△G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
(△:cable type
S:standard, H:high temp. cable, R:robot cable)
＜Water proof option＞
WPCN:submersible connector type
WPG□F:pigtail / cable end : free
WPG□A:pigtail / cable end : with connector for relay
(□:cable length(m))
⑦Position output
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
Dimensions
Connector type（Code：CN)
Pigtail type（Code：G※)
