Santest GY Series : GYSE-S-PF Probe
SSI output (detachable probe element)
Specifications
| Non-linearity | ≦±0.025%FS TYP |
|---|---|
| Resolution | 0.1mm-0.001mm specified |
| Repeatability | ≦±0.001%FS (Min. ±3μm) |
| Temp. drift | ±15ppmFS/°C以 |
| Position (STD) | SSI (Synchronized Serial Interface), 24bit, Binary(STD) or Gray |
| Velocity (Option) | not available |
| Alarm | Open drain 50V 0.1A (for lost magnet) |
| Power supply | +24(±2)VDC (70mA) |
| Sampling freq. | Std 1kHz(up to stroke 1000mm) |
| Operating temp. | -20°C-+75°C |
| Storage temp. | -40°C-+75°C |
| Vibration | 15G (20-100Hz) |
| Shock | 100G (2msec) |
| IP grade | IP65 |
・The above mentioned accuracy applies to sensors with an effective stroke of 300 mm or more.
・Fixing clamps are supplied.
stroke < 600mm:2 pcs
600-1000mm:3 pcs
1001-1200mm:4 pcs
1501-2000mm:5 pcs
Model No.
①Effective stroke
15-7500mm
②Thread dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
③Tip dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
④Associated magnet
PFU :PFU slide magnet
M11N :No.11N
M11S :No.11S
BP :No.5PFT-LG
MG□ :other magnet
⑤Cable connection
CN:connector(STD)
△G□F:pigtail / cable end : free
△G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
(△:cable type
S:standard, H:high temp. cable, R:robot cable)
⑥Resolution
D2:0.1mm
D3:0.05mm
D4:0.01mm(STD)
D5:0.005mm
D7:0.002mm
D8:0.001mm
⑦Direction
D:When magnet moves toward tip, output increase
R:When magnet moves toward tip, output decrease
⑧Output code
B:Binary(STD)
G:Gray
Dimensions
Probe
magnet
Connection
