Santest GY Series : GYDC-05 Controller
High accuracy digital output (Parallel, SSI, A/B pulse)
Other features are as options, -Additional analogue output of magnet velocity -SSI output and incremental output GYDC-05 controller can be used with:GYcRS/GYMR5/GYFRS/GYGS/GYPM/GYHR/GYcRP probes.
Specifications
| Position (digital)（24bit） |
Parallel, Binary code(*1), Tr On=「1」 (option:SSI or A/B incremental output) |
|---|---|
| Resolution (digital) |
Probe:GYSE-R, GYcRS, GYMR5, GYFRS STD 0.01mm(Min. 0.001mm) Probe:GYGS, MS, PM, HR, cRP, KM STD 0.1mm |
| Position（OUT1） (analogue) |
0-10V(Max.5mA, Min.2kΩ) or 4-20mA(load:Max.500Ω) |
| Resolution (analogue) |
Probe:GYSE-R, GYcRS, GYMR5, GYFRS 16bit(1/65536) Probe:GYGS, MS, PM, HR, cRP, KM ≦0.01%FS |
| Velocity （OUT2） |
Option ±10V or 4-20mA |
| Alarm(*2) | Open collector 0.1A 30VDC(*2) |
| Power supply | +24VDC±5%(≦160mA) |
| Sampling freq. | Std 1kHz(up to stroke 1000mm) |
| Temp. drift | ≦±10ppmFS/°C |
| Operating temp. | 0°C-+65°C |
| Storage temp. | -20°C-+75°C |
・The above mentioned accuracy applies to sensors with an effective stroke of 300 mm or more.
(*1)can be changed to Gray code at user side
(*2)Cable disconnection and magnet drop
Model No.
①Digital output
1:Standard, parallel output
2100:with A/B incremental(pulse freq.:1MHz)
2200:with A/B incremental(pulse freq.:500kHz)
(standard for resolution D7 or D8)
2300:with A/B incremental(pulse freq.:250kHz)
(standard for resolution D2-D5)
2400:with A/B incremental(pulse freq.:125kHz)
2600:with A/B incremental(pulse freq.:31kHz)
2700:with A/B incremental(pulse freq.:15kHz)
005A:with SSI output
005S:with SSI output : External sync.
・In case of A/B incremental, Max. magnet speed is limited with the selected resolution and pulse freq.
For standard setting, the speed is as below.
| Resolution(mm) | Pulse freq. | Max. magnet speed |
|---|---|---|
| 0.1 | 250kHz | 15m/sec |
| 0.05 | 250kHz | 15m/sec |
| 0.01 | 250kHz | 8m/sec |
| 0.005 | 250kHz | 4m/sec |
| 0.002 | 500kHz | 3.2m/sec |
| 0.001 | 500kHz | 1.6m/sec |
②Resolution
D2:0.1mm
D3:0.05mm ・probe:GYSE-R, GYcRS, GYMR5, GYFRS, D4 is STD.
D4:0.01mm ・probe:GYGS, GYMS, GYPM, GYcRP, GYHR, GYKM, only D2 is available.
D5:0.005mm
D7:0.002mm
D8:0.001mm
③Direction of output
D:output data increase toward probe tip
R:output data decrease toward probe tip
④Probe
SR:GYSE-R
RS:GYcRS
R5:GYMR5
FS:GYFRS
HR:GYHR
GS:GYGS
PM:GYPM
RP:GYcRP
MS:GYMS
PR:GYPMR
P2:GYPE2K
KM:GYKM
KRS:GYKM-RS
⑤Effective stroke(mm)
⑥Thread dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
⑦Associated magnet or float
| magnet | float |
|---|---|
| M2P :No.2P (STD) M0SM :No.ΦSPM MG0 :No.Φ M0LM :No.ΦLPM M3 :No.3 M2PN :No.2PN M11N :No.11N M11 :No.11 T144 :No.T14-M4 T142 :No.T14-M2 T163 :No.T16-M3 T162 :No.T16-M2 MG□ :other magnet |
F30S :Φ30 SS316L F28S :Φ28 SS316 F42S :Φ42.5 SS316 F40S :Φ40 SS316(B) F54S :Φ54 SS304 F50S :Φ50 SS316 F28N :RF-A6 plastic F25N :RF-A10 plastic FL□ :other float |
⑧Position output(OUT1)
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
V Z/F:option (specified voltage)
(for example V1/5:1-5V, V9.5/0.5:9.5-0.5V)
I Z/F:option (specified current)
(for example I5.2/20:5.2-20mA, I18/5:18-5mA)
【Z=output at zero position, F=output at full position】
⑨additional analogue output(OUT2)
・N:without option(STD)
・position output:select from ⑤
・velocity output(Note1)
VA[ ]:±10V
WB[ ]:4-20mA
[ ]:max velocity (1.00-999mm/sec)
(ex.9R99: max velocity=9.99mm/sec)
(Note1)
VA:When magnet stops, output is 0V.
When moving toward probe tip, +10V.
WB:When magnet stops, output is 4mA.
When moving in any direction, 20mA
⑩Option
2ME:2 magnets, each magnet position
2MR:2 magnets, relative distance between 2pcs(OUT1)
X2:higher sampling freq. double
X3:higher sampling freq. triple
X4:higher sampling freq. qaudruple (3.75kHz)
＜For higher sampling option＞
・probe tip DZ needs extra 30mm
・for example, stroke : 500mm, standard is 1kHz and with X2 option, it is 2kHz.
Dimensions
Controller
Wiring
