Santest GY Series – GYcAT4
Analogue output (replacement model for GYLT, GYLS)
Linearity : ≦±0.05%FS.
current consmption is 100mA.
Specifications
| Non-linearity | ≦±0.05%FS TYP |
|---|---|
| Resolution | ≦0.01%FS |
| Repeatability | ≦±0.01%FS |
| Temp. drift | ≦±40ppmFS/°C |
| Voltage output | 0-10V or 10-0V (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20m or 20-4mA (load:Max.500Ω) |
| Alarm output | not available |
| Power supply | +24(±2)VDC (100mA) |
| Sampling freq. | Std 1kHz (up to stroke 1000mm) |
| Msx. Pressure | 35MPa (probe rod) |
| Operating temp. | -20°C-+80°C |
| Storage temp. | -40°C-+80°C |
| Vibration | 6G (or 40Hz 2mmPP) |
| Shock | 50G (2msec) |
| IP grade | IP67 (10kPa, 30min) |
・The above mentioned accuracy applies to sensors with an effective stroke of 300 mm or more.
Model No.
①Effective stroke
15-3500mm
②Thread dead zone
S:50mm (STD)
□:□mm (option) (specified by customers)
③Tip dead zone
S:70mm/90mm/100mm (STD)
・S (STD length) depends on the selected magnet or float in ⑤.
| tip DZ | magnet | float |
|---|---|---|
| 70mm | M2P,M2PN,MG0,M0SM,M0LM,M11,M11N,M3 | F25N,F28N |
| 90mm | F28S,F30S | |
| 100mm | T142(144), T162(163) | F40S, F42S, F50S |
□:□mm(option)(specified by customers)
④Thread/Rod diameter
M :M24xP1.0, rod Φ10 (STD)
N :M18xP1.5, rod Φ10
U :3/4-16UNF-3A, rod Φ10
M8 :M24xP1.0, rod Φ8
N8 :M18xP1.5, rod Φ8
U8 :3/4-16UNF-3A, rod Φ8
M14:M24xP1.0, rod Φ13.8
⑤Associated magnet or float
| ＜magnet＞ | ＜float＞ |
|---|---|
| M2P:No.2P (STD) M2PN:No.2PN MG0:No.Φ M0SM:No.ΦSPM M0LM:No.ΦLPM M3:No.3 M11:No.11 M11N:No.11N T142:No.T14-M2 T144:No.T14-M4 T162:No.T16-M2 T163:No.T16-M3 MG□:other magnet |
F28S:Φ28 SS316 F30S:Φ30 SS316L F40S:Φ40 SS316(B) F42S:Φ42.5 SS316 F50S:Φ50 SS316 F54S:Φ54 SS304 F25N:RF-A10 plastic F28N:RF-A6 plastic FL□:other float |
⑥Cable connection
CN:connector(STD)
G□F:pigtail / cable end : free
G□A:pigtail / cable end : with connector for relay
(□:cable length (m))
⑦Position output
AD:0-10V (When magnet moves toward tip, output increase)
AR:10-0V (When magnet moves toward tip, output decrease)
BD:4-20mA (When magnet moves toward tip, output increase)
BR:20-4mA (When magnet moves toward tip, output decrease)
CD□□:bipolar output (-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
⑧Option (see page 72-74)
blank:without option
H0:probe rod 100°C
Dimensions
Probe
Pigtail type (Option)
・Material probe head:Al diecast, probe rod:SS304
・Standard magne:No.2PN. Other magnets are available from Magnet Grouping「B」(P.75).
・The tip dead zone length depends on the selected magnet or float type.
・The length of the cable should be less than 10m in case of using the voltage output type and 100m in case of using the current output type.
・Connector:Omron XS2C-D4S1 (straight type) or D4S2 (L type) (Material:PBT plastic)
・Applied cable diameter:Φ5-Φ6
・Wire size:0.18-0.75mm2
