Santest GY Series – GYMS Probe / GYMSC Controller
Compact
Protection IP67
In combination with standard GYMSC controller, position output 0-10V / 4-20mA is available.
For velocity output or digital output, GyMS probe can be associated with GYHC or GYDC-05 controller.
Specifications
| Non-linearity | ≦±0.025%FS TYP |
|---|---|
| Resolution | ≦0.01%FS |
| Repeatability | ≦±0.01%FS |
| Temp. drift | ≦±40ppmFS/°C (probe) ≦±50ppmFS/°C (controller) |
| Voltage output | 0-10V or 10-0V |
| (output current：Max.5mA, load：Min.2kΩ) | Current output |
| 4～20m or 20～4mA (load：Max.500Ω) |
Alarm output |
| not availble | Power supply |
| +24(±2)VDC (100mA) | Sampling freq. |
| Std 1kHz (up to stroke 1000mm) | Max. Pressure |
| 35MPa (probe rod) | Operating temp. |
| -20℃～+80℃ (probe) 0℃～+60℃ (controller) |
Storage temp. |
| -40℃～+80℃ | Vibration |
| 6G (or 40Hz 2mmPP) | Shock |
| 50G (2msec) | IP grade |
| IP67 (probe) | Cable |
*The above mentioned accuracy applies to sensors with an effective
stroke of 300mm or more.
*Zero/Gain adjustment by trimmer of controller are possible, std within ±3%FS.
Model No.
①Effective stroke
15-3000mm
②Thread dead zone
S:50mm (STD)
□:□mm (option)(specified by customers)
③Tip dead zone
S:70mm/90mm/100mm (STD)
・S (STD length) depends on the selected magnet or float in ⑤.
| tip DZ | magnet | float |
|---|---|---|
| 70mm | M2PN, M0SM, M0LM, M3, M11N |
F25N, F28N |
| 90mm | F28S, F30S | |
| 100mm | T144, T163 | F40S, F42S, F50S |
□:□mm(option)(specified by customers)
④Thread/Rod diameter
J8 :M20xP1.0, rod Φ8(STD)
L8 :M16xP2.0, rod Φ8
E8 :M20xP1.5, rod Φ8
N :M18xP1.5, rod Φ10
U :3/4-16UNF-3A, rod Φ10
K6 :M16xP1.5, rod Φ6
⑤Associated magnet or float
| magnet | float |
|---|---|
| M2PN :No.2PN (STD) M0SM :No.ΦSPM M0LM :No.ΦLPM M3 :No.3 M11N :No.11N T144 :No.T14-M4 T163 :No.T16-M3 MG□ :other magnet |
F28S :Φ28 SS316 F30S :Φ30 SS316L F40S :Φ40 SS316(B) F42S :Φ42.5 SS316 F50S :Φ50 SS316 F54S :Φ54 SS304 F25N :RF-A10 plastic F28N :RF-A6 plastic FL□ :other float |
⑥Cable connection
G□F:pigtail / cable end : free
G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
CN:connector(option)
⑦Position output
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
⑧Power Supply
24S:+24VDC(STD)
Dimensions
