Santest GY Series – GYPE2K Probe / GYMSC Controller
Probe rod Φ4
Standard magnet and float can be used.
With the GYMSC controller, it outputs analogue signal of 0-10V or 4-20mA.
Specifications
| Non-linearity | ≦±0.5%FS TYP |
|---|---|
| Resolution | ≦0.01%FS |
| Repeatability | ≦±0.01%FS |
| Repeatability | ≦±0.01%FS/°C (probe) ≦±0.01%FS/°C (cotroller) |
| Voltage output | 0-10V or 10-0V (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20mA or 20-4mA (load:Max.500Ω) |
| Alarm output | not available |
| Power supply | +24(±2)VDC (100mA) |
| Sampling freq. | approx 1kHz sampling (Note1) |
| Max. Pressure | 18MPa(probe rod, static for 10 min.) |
| Operating temp. | -20°C-+80°C (probe) 0°C-+60°C (controller) |
| Storage temp. | -40°C-+80°C |
| Vibration | 3G (or 40Hz 1mmPP) |
| Shock | 20G (2msec) |
| IP grade | IP64 (probe) |
| Cable | Std 1.5m (Option Max.5m) |
・The above mentioned accuracy applies to sensors with an effective stroke of 100mm or more.
・Zero/Gain adjustment by trimmer of controller are possible, std within ±3%FS.
(Note1) liquid level application:approx 100Hz sampling
Model No.
①Effective stroke
50mm-250mm
②Thread dead zone
S:35mm(No.Φ magnet)
28mm(Ti float)
□:□mm(option)(specified by customers)
③Tip dead zone
S:30mm(No.Φ magnet)
42mm(Ti float)
□:□mm(option)(specified by customers)
④Thread/Rod diameter
Y4 :M18xP1.0, rod Φ4(STD)
⑤Associated magnet or float
| magnet | float |
|---|---|
| MG0 :No.Φ(STD) | FL21 :Ti |
⑥Cable connection
G□F:pigtail / cable end : free
G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
Please use the cable as specified though it is possible to extend to Max.
5m in case so specify in advance. (The cable cannot beextended, nor cut.)
The terminal stand or connector etc. can be used to arrange cable length.
⑦Position output
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
Dimensions
