Santest GY Series – GYPM Probe / GYPMC Controller
Dead zone 30mm (thread side)
GYPM probe is used in combination with the GYPMC controller, which provides analogue output, 0-10V or 4-20mA, and can also be used in combination with GYHC or GYDC-05 controller, which provides velocity output or digital output. (refer P.42, P.46)
Specifications
| Non-linearity | ≦±0.05%FS TYP |
|---|---|
| Resolution | ≦0.01%FS |
| Repeatability | ≦±0.01%FS |
| Temp. drift | ≦±70ppmFS/°C (probe) ≦±50ppmFS/°C (controller) |
| Voltage output | 0-10V or 10-0V (output current:Max.5mA, load:Min.2kΩ) |
| Current output | 4-20mA or 20-4mA (load:Max.500Ω) |
| Alarm output | not available |
| Power supply | +24(±2)VDC (100mA) |
| Sampling freq. | Std 1kHz (up to stroke 1000mm) |
| Max. Pressure | 35MPa (probe rod) |
| Operating temp. | -5°C-+60°C (probe) 0°C-+60°C (controller) |
| Storage temp. | -40°C-+80°C |
| Vibration | 6G (or 40Hz 2mmPP) |
| Shock | 20G (2msec) |
| IP grade | IP64 (probe) |
| Cable | Std 1.5m (Option Max.100m) |
・The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
・Zero/Gain adjustment by trimmer of controller are possible, std within ±3%FS.
Model No.
①Effective stroke
15-1000mm
②Thread dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
③Tip dead zone
S:70mm/90mm/100mm(STD)
・S (STD length) depends on the selected magnet or float in ⑤.
| tip DZ | magnet | float |
|---|---|---|
| 70mm | M2PN, M0SM, M0LM, M3, M11N |
F25N, F28N |
| 90mm | F28S, F30S | |
| 100mm | T144, T163 | F40S, F42S, F50S |
□:□mm(option)(specified by customers)
④Thread/Rod diameter
N8 :M18xP1.5, rod Φ8(STD)
⑤Associated magnet or float
| magnet | float |
|---|---|
| M2PN :No.2PN (STD) M0SM :No.ΦSPM M0LM :No.ΦLPM M3 :No.3 M11N :No.11N T144 :No.T14-M4 T163 :No.T16-M3 MG□ :other magnet |
F28S :Φ28 SS316 F30S :Φ30 SS316L F40S :Φ40 SS316(B) F42S :Φ42.5 SS316 F50S :Φ50 SS316 F54S :Φ54 SS304 F25N :RF-A10 plastic F28N :RF-A6 plastic FL□ :other float |
⑥Cable connection
G□F:pigtail / cable end : free
G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
⑦Position output
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
Dimensions
