Santest GY Series – GYSE-A Probe
High performance analogue output (detachable probe element)
Specifications
| Non-linearity | ≦±0.025%FS TYP |
|---|---|
| Resolution | 16bit (1/65536) |
| Repeatability | ≦±0.001%FS (Min. ±3μm) |
| Temp. drift | Temp. drift ≦±20ppmFS/°C |
| Position (STD) | 0-10V (output current : Max.5mA, load : Min.2kΩ) or 4-20mA (load : Max.500Ω) |
| Velocity (Option) | ±10V (output current : Max.5mA, load : Min.2kΩ) or 4-20mA (load : Max.500Ω) |
| Alarm | Open drain 50V 0.1A (for magnet missing) |
| Power supply | +24(±2)VDC (70mA) |
| Sampling freq. | Std 1kHz (up to stroke 1000mm) |
| Max. Pressure | 35MPa (probe rod) |
| Operating temp. | -20°C-+75°C |
| Storage temp. | -40°C-+75°C |
| Vibration | 15G (20-100Hz) |
| Shock | 100G (2msec) |
| IP grade | IP67 |
・The above mentioned accuracy applies to sensors with an effective stroke of 300 mm or more.
Model No.
①Effective stroke
15-7500mm
②Thread dead zone
S:50mm(STD)
□:□mm(option)(specified by customers)
③Tip dead zone
S:70mm/90mm/100mm(STD)
・S (STD length) depends on the selected magnet or float in ⑤.
| tip DZ | magnet | float |
|---|---|---|
| 70mm | M2PN,M0SM,M0LM,M3,M11N | F25N,F28N |
| 90mm | F28S,F30S | |
| 100mm | T144,T163 | F40S,F42S,F50S |
□:□mm(option)(specified by customers)
④Thread/Rod diameter
M :M24xP1.0, rod Φ10(STD)
N :M18xP1.5, rod Φ10
U :3/4-16UNF-3A, rod Φ10
M8 :M24xP1.0, rod Φ8
N8 :M18xP1.5, rod Φ8
U8 :3/4-16UNF-3A, rod Φ8
M14:M24xP1.0, rod Φ13.8
ZZ:EF (flexible element) only (without outer housing)
⑤Associated magnet or float
| magnet | float |
|---|---|
| M2PN :No.2PN (STD) M0SM :No.ΦSPM M0LM :No.ΦLPM M3 :No.3 M11N :No.11N T144 :No.T14-M4 T163 :No.T16-M3 MG□ :other magnet |
F28S :Φ28 SS316 F30S :Φ30 SS316L F40S :Φ40 SS316(B) F42S :Φ42.5 SS316 F50S :Φ50 SS316 F54S :Φ54 SS304 F25N :RF-A10 plastic F28N :RF-A6 plastic FL□ :other float |
⑥Cable connection
CN:connector(STD)
△G□F:pigtail / cable end : free
△G□A:pigtail / cable end : with connector for relay
(□:cable length(m))
(△:cable type
S:standard, H:high temp. cable, R:robot cable)
⑦Position output(OUT1)
AD:0-10V(When magnet moves toward tip, output increase)
AR:10-0V(When magnet moves toward tip, output decrease)
BD:4-20mA(When magnet moves toward tip, output increase)
BR:20-4mA(When magnet moves toward tip, output decrease)
CD□□:bipolar output(-□V-+□V)
(for example CD10:-10V-+10V)
CR□□:bipolar output(+□V–□V)
(for example CR05:+5V–5V)
V Z/F:option (specified voltage)
(for example V1/5:1-5V, V9.5/0.5:9.5-0.5V)
I Z/F:option (specified current)
(for example I5.2/20:5.2-20mA, I18/5:18-5mA)
【Z=output at zero position, F=output at full position】
⑧Option : Analogue output(OUT2)
・N:without option(STD)
・position output:select from ⑦
・Velocity output(Note1)
VA[ ]:±10V
WB[ ]:4-20mA
[ ]:max. velocity(1.00-999 mm/s)
(Note1)
VA : When magnet stops, output is 0V.
When moving toward probe tip, +10V.
WB : When magnet stops, output is 4mA.
When moving in any direction, 20mA.
⑨Option (see page 72-74)
blank:without option
SRT:SRT option
H0:probe rod 100°C
EF:flexible element
Without EF option, GYSE probe element is detachable though the rod parts is stiff. With EF option, as to accuracy or other specs, please consult factory.
Dimensions
Probe
Connection
Connector type
Pigtail type
・materials ; Probe head : Al alloy, Probe rod : SS304
・magnet (float) ; Select one from group GG on page 75 or from floats on page 76.
・The tip dead zone length depends on the selected magnet or float.
・connector ; straight or L-sharped (housing parts : BS with Ni plating)
・Connector-cable assembly is done at SANTEST, since special tool is required.
・cable length ; Max.10m (0-10V output), Max.100m (4-20mA)
