Driver Card – CBM 105
Models Applicable
PM486FS, PM486FE, PM486FP, PM570FE, PM605FE, PM635FS
Connectors for power and control are:
Power: WAGO #734-102 (Included)
Control: WAGO #733-105 (Included)
Specification Document
Features:
- Provides thermal protection for both Power Moller and driver card
- Two LED’s to identify type of error
- Error output signal for self diagnosis
- Dynamic brake and servo brake control
- Variable speed by rotary switch or external voltage input
- Direction control by DIP switch or external signal input
- Adjustable acceleration and deceleration time (0-2.5s)
- Switch for automatic or manual recovery of back EMF error and thermal overload device
- Forcibly stops the motor if there is a motor lock, back EMF, or thermal overload occurs
- Includes mounting hardware and wiring connector
- Two (2) M4 x 15 phillips pan head mounting screws and nuts
- Connectors for power and control are:
Power: WAGO #734-102 (Included)
Control: WAGO #733-105 (Included)
Specifications:
| Electrical | • 24V DC ±10% input |
|---|---|
| • Battery | |
| • Power Supply: fullwave rectified with smoothed current and < 10% Ripple | |
| • Power ON delay < 1s | |
| • 4A locking current | |
| • Input signal level for activation | |
| • 0V (3V or less) for NPN | |
| • 24V (18V or greater) for PNP | |
| • Output (Error and Motor Pulse) signals | |
| • Open collector 24V, 25mA or less | |
| • NPN | |
| • PNP (selectable for Error only) | |
| • Brake model only | |
| • 0.2s delay between stop signal and mechanical brake reaction | |
| • 0.2A brake current @24V (< 0.1s) | |
| • Brake coil is active (disengaging brake) while motor is running | |
| Brake | • Dynamic (Electric-Both models) |
| • Mechanical (CB-016BS7 only) | |
| Protection | • Thermal protection reaction |
| • 85° C (185° F) on the PCB | |
| • 105° C (221° F) in the motor | |
| • Built-in 5A fuse for power supply protection | |
| • Built-in diode for incorrect wiring protection | |
| Applicable Environment | • Temperature 0~40° C (32~104° F) |
| • < 90% Relative Humidity (No condensation) | |
| • No corrosive gas | |
| • Vibration < 0.5G | |
| Power Source | • 24VDC Battery or 24VDC Power Supply• Battery or fullwave rectified with smoothed current < 10% Ripple |
